Product Details

Specifications

pvc profile extrusion line
1.PVC profile extruding
2.Output:100kg/h
3.Steady performance
4.ISO9001:2008 &CE,SGS

pvc profile extrusion line

Main technical parameter:

1. Conical twin-screw extruder SJSZ51/105

Screw diameter	51mm
L/D	25:1
Efficient length	1070mm
Motor power	18.5kw
Rotating speed of screw	1-32rpm
Heating power	12kw
Extrusion capacity	50-100kg/h
Center height	1000mm
Main Extruder speed adjusting way	Frequency conversion(Fuji inverter)
Feeding extruder speed adjusting way	Frequency conversion (Fuji inverter)
Barrel temperature adjusting way	Heating: cast aluminum heater Cooling: 3 sections cooling by air
Main electric component	SIEMENS/Schneider
Temperature controller	OMRON/RKC
Weight	2300kg
Figure dimension	3500 x 1400 x 2300mm
Material of screw and barrel	38CrMoAlA Azotizing on surface 0.4~0.7mm Rigidity: above 700 HV
Drive way	Hard tooth face gearbox
Vacuum exhaust system	1.5 kw watering

2. Stainless steel vacuum calibrating platform

Vacuum pump	4kw x 2
Water pump	4kw x 1
Lengthways motor	1.1kw cycloid and pin gear type
Vacuum quickly change fittings	20pcs.
Cooling water quickly change fittings	20pcs.
Adjusting manner	Tri-dimension adjusting
Calibrating platform guideway material and manner	Stainless steel, aluminum guideway
Vacuum rate	0-0.09Mpa
Lifting table’s adjusting manner	By hand
Dimension	4000 x 1100 x 1400mm

3.Caterpillar haul-off machine

Traction speed	0.3-3 m/min
Power of traction motor	3 kw
Effective length of drive	1200 mm
Timing method of drive motor	Frequency conversion (Fuji inverter)
Center height	1000 mm
Air pressure	≥0.6 MPa
Dimension	1600 x 800 x 1400 mm