OUTDOOR FIRE HYDRANT

Brand Name: WATER POWER FIRE CONTROL

Product Name:OUTDOOR FIRE HYDRANT

Nominal Diameter: DN100,DN150

Material:Ductile iron

Rated Working Pressure:1.6 Mpa

Testing Pressure:2.4 Mpa

Applicable Medium:Water and foam mixture

Type: Ground fire hydrant,Underground fire hydrant

Usage: towns, streets, organs, schools and hospitals,etc.

Color: red (optional)

We accept customized 

Technical Parameters

Mounting and Using             

1. Outdoor fire hydrant installation requirements of local red paint above the ground. Without prejudice to the traffic situation, it should be placed at eye-catching. The main outlet should face the street.

2. The fire hydrant must bend in the sediment debris cleared before installation clean.

3. When used with a special wrench to open the outlet boring cover, connected with water, then special wrench to open the valve, you can supply. After use, close the valve, shut outlet boring cover.

Products Image  

Maintenance

1. The first month or every major holiday, fire extinction must be subject to conduct an inspection.

2. Clear debris around the stem end, dedicated to the head plate gloves, check whether the right, turn the valve stem, add oil.

3. Oil yarn erase the rust stains on the thread outlet, check the stuffy cover rubber gasket is intact.

4. Open fire extinction check, inspect the supply, put the net in the water and then shut tight rust, and observe whether the water leakage.

5. The appearance of peeling paint should be promptly repaired.

6. Check for and remove obstacles near fire hydrants.

Anita Chong