Specifications

GL Marine Communication Cable
1.tinned copper conductor
2.Twisted pair
2.EPR/XLPE insulation
3.PVC PO sheath

GL Marine Communication Cable

Rating voltage: 150V/250V

Standards applied

IEC60228 IEC60092-351 IEC60092-376 IEC60092-359

IEC60332-1 IEC60332-3-22 IEC60331 IEC60754-2 IEC60134-2

marine communication cable Construction:

1. Conductor: twisted pair tinned copper wire,class2 or 5

2. Fire resistant Mica tape on request

3. Insulation: XLPE/EPR

4. Individual shield: tinned copper wire braided or AL polyester tape+drain wire

5. Filler ( if necessary)

6. Tape

7. Inner sheath: PVC/PCP/PO(SHF1,SHF2)

8. Overall shield/Armored: tinned copper wire braided or Galvanized steel wire braided

9. Outer sheath:PVC/PCP/PO(SHF1, SHF2)

marine communication cable Specifications:

Cores(in pairs or triples): 1,2, 3, 4, 5, 7, 8,10, 12, 14, 16,19, 24, 27, 30, 33, 37

Nominal Cross-section Areas: 0.75mm2, 1 mm2, 1.5mm2, 2.5mm2

Flammability features

SA:bunched cable flame retardant

SC:bunched cable flame retardant,halogen free & low smoke

NA:bunched cable flame retardant,fire resistant

NC:bunched cable flame retardant,fire resistant,halogen free & low smoke

Application:

This marine communication cable is intended for control,instrumentation,telecommunication and alarm system of shipboard or offshore building.It is also available for power plant,chemical works and mines,etc.

Classification Society Certificates

CCS,ABS,DNV,BV,LRS,GL,RINA,KR,NK.

The radius of bend for the installation of marine communication cable

Cable structure features Over diameter of cable(D) Minimum internal bending radius

Metal braided armored Any value 6D

Non-armored D≤25 4D        D>25 6D

     

                     

welcome to contact me for more information

Jack Wu(Mr.)

Cellphone:+86 159 68466895