Name: LED Power Supply 60W 12V led driver class 2 12/24vdc
Brand: CCQ
Availability: InStock

Product Details

Product Description

LED Power Supply 60W 12V led driver class 2 12/24vdc

Features

1.Extensive range input voltage (85-264VAC)

2.Low profile product,cooling down by free fresh air convection

3.Protects:Short circuit/Overburden/Over voltage

4.Very best quality over 91%

5.CE, Rohs, FC safety standards.

6.Ideal for indoor led lighting and travelling signals.

Technical Specifications:

Item No.		NS-60W-12V	NS-120W-12V	NS-360W-12V	NS-60W-24V	NS-120W-24V	NS-360W-24V
Output	DC Voltage	12V	12V	12V	24V	24V	24V
	Rated Current	5A	10A	30A	2.5A	5A	15A
	Current Range	0~5A	0~10A	0~30A	0~2.5A	0~5A	0~15A
	Rated Power	60W	120W	360W	60W	120W	360W
	Ripple & Noise (Max) Note 2	120mVp-p	125mVp-p	100mVp-p	150mVP-p	120mVp-p	150mVp-p
	Voltage Tolerance Note 3	±1.0%	±1%	±1.0%	±0.6%	±0.6%	±0.6%
	Line Regulation	±1.0%	±1.0%	±1.0%	±1.0%	±0.6%	±1.0%
	Load Regulation	±1%	±1%	±1.0%	±1.0%	±0.6%	±1.0
	Set up time,Hold time	1000ms,30ms at full load
Input	Voltage Range Note. 4	90~250VAC;100~250VAC
	Frequency Range	47~63Hz
	Efficiency (Type.)	86%	86%	86%	88%	88%	88%
	AC Current (Type.)	3.15A/115VAC 1.5A/230VAC
	Inrush Current (Max)	Cold Start 20A/115VAC 40A/230VAC
	Leakage Current	<1mA / 240 VAC
Protection	Over Load	105 ~ 150% rated output power
	Over Load	Protection Type:Hiccup mode, recovers automatically after fault condition is removed
	Over Voltage	5.75~6.75V	13.8 ~16.2V	12.76 ~14.87V	27.6 ~ 32.4V	27.8~32.6V	22.56 ~ 27.45V
	Over Voltage	Protection type: Shut down o/p voltage, re-power on to recover
Environment	Working Temperature	-30 ~ 70°c
	Working Humidity	20 ~ 90% RH non-condensing
	Storage temp & Humidity	-40~+80°c,10~95%RH
	Temp. coefficient	±0.03/ºc (0~50°c)
	Vibration	10 ~ 500Hz,2G 10min/1cycle,period for 60min,each along X,Y,Z axes
Safety and EMC	Safety Standards	IP42 approved
	Withstand Voltage	I/P-O/P:3KVAC
	Isolation Resistance	I/P-O/P:>100M ohms /500VDC /25 °C / 70% RH
	EMC Emission	Compilance to EN55022 (CISPR22) Class B,EN61000-3-2 class A (≤80 load), EN61000-3-3
	EMC Immunity	Comply with EN55022 class B, EN61000-3-2 class A (≤80% load), EN 61000-3-3
Others	MTBF	703Khrs min, MIL-HDBK-217F (25ºC)
	Measurement	110x78x36 mm for 60w,129x98x38 mm for 120w,215x114x50mm for 360w
	Packing	net weight:0.25/0.35/0.78kg,96 pcs/69pcs/20pcs in carton size (1.18/1.47/1.17cuft)
	Remark: 1.All technical data if not mentioned, it should be measured at 230v,rated load and 25 °c of relative temperature 2.Ripple and noise are tested at 20mhz of bandwidth via 12" twitsted pair-wire terminated with 0.1uf and 47uf parael cap. 3.Tolerance:set up tolerance,line regulation and load regulation are included 4.derating may be loaded with low input voltage, it should double check the detailed static characteristics 5.As power supply need to connected with final terminal equipment, which require the equipment to comply with EMC standard on the complete installation process again 6.Length of set up times is measured at first cold start, turning ON/OFF the power supply may result in expanding set up time.