Product Details

Product Description

New Coming 150W output switching power supply 12v 150w extra slim power supply

Features

1.Full-range input voltage (85-264VAC)

2.Strip type design, high efficiency

3.Protects:Short circuit/Over loading/Over voltage

4.CE, Rohs, FC safety criterion.

5.Appropriate for home led lighting products and driving indicators.

6.CE, Rohs, FC essential safety standards.

Technical Specifications:

Item No.		CQ-60W-12V	CQ-150W-5V	CQ-150W-12V	CQ-60W-24V	CQ-100W-24V	CQ-150W-24V
Output	DC Voltage	12V	5V	12V	24V	24V	24V
	Rated Current	5A	30A	12.5A	2.5A	4.1A	6.3A
	Current Range	0~5A	0~30A	0~12.5A	0~2.5A	0~4.1A	0~6.3A
	Rated Power	60W	150W	150W	60W	100W	150W
	Ripple & Noise (Max) Note 2	120mVp-p	80mVp-p	100mVp-p	150mVP-p	135mVp-p	150mVp-p
	Voltage Tolerance Note 3	±1.0%	±8%	±5.0%	±0.6%	±5%	±0.6%
	Line Regulation	±1.0%	±1.0%	±1.0%	±1.0%	±1.0%	±1.0%
	Load Regulation	±1%	±6%	±2.0%	±1.0%	±2.0%	±1.0
	Set up time,Hold time	300ms,50ms,80ms/230VAC;800ms,50ms,10ms/115VAC at full load; 2000ms,25ms/230VAC 2000ms,25ms/115VAC
Input	Voltage Range Note. 4	90~250VAC;100~250VAC
	Frequency Range	47~63Hz
	Efficiency (Type.)	90%	90%	90%	91%	91%	91%
	AC Current (Type.)	2.2A/115VAC 1.2A/230VAC
	Inrush Current (Max)	Cold Start 30A/115VAC 60A/230VAC
	Leakage Current	<3.5mA / 240 VAC
Protection	Over Load	105 ~ 150% rated output power
	Over Load	Protection Type:Hiccup mode, recovers automatically after fault condition is removed
	Over Voltage	5.75~6.75V	13.8 ~16.2V	12.76 ~14.87V	27.6 ~ 32.4V	5.75 ~6.75V	27.6 ~ 32.40V
	Over Voltage	Protection type: Shut down o/p voltage, re-power on to recover
Environment	Working Temperature	-30 ~ 70°c
	Working Humidity	20 ~ 90% RH non-condensing
	Storage temp & Humidity	-40~+80°c,10~95%RH
	Temp. coefficient	±0.03/ºc (0~50°c)
	Vibration	10 ~ 500Hz,2G 10min/1cycle,period for 60min,each along X,Y,Z axes
Safety and EMC	Safety Standards	IP42 approved
	Withstand Voltage	I/P-O/P:3KVAC
	Isolation Resistance	I/P-O/P:>100M ohms /500VDC /25 °C / 70% RH
	EMC Emission	Compilance to EN55022 (CISPR22) Class B,EN61000-3-2 class A (≤80 load), EN61000-3-3
	EMC Immunity	Comply with EN55022 class B, EN61000-3-2 class A (≤80% load), EN 61000-3-3
Others	MTBF	703Khrs min, MIL-HDBK-217F (25ºC)
	Measurement	160x40x31 for 60w,187x46x35 for 100w,200x58x37 for 150wmm
	Packing	net weight:0.19/0.26/0.41kg,96 pcs/69pcs/44pcs in carton size (1.18/1.48/1.48cuft)
	Remark: 1.All technical data if not mentioned, it should be measured at 230v,rated load and 25 °c of relative temperature 2.Ripple and noise are tested at 20mhz of bandwidth via 12" twitsted pair-wire terminated with 0.1uf and 47uf parael cap. 3.Tolerance:set up tolerance,line regulation and load regulation are included 4.derating may be loaded with low input voltage, it should double check the detailed static characteristics 5.As power supply need to connected with final terminal equipment, which require the equipment to comply with EMC standard on the complete installation process again 6.Length of set up times is measured at first cold start, turning ON/OFF the power supply may result in expanding set up time.