Product Details

Product Description

CCQ 500w 40A 100v/250v Ac input to dc Extra thin indoor led driver switching power supply

Ultra Thin Series LED Power Supply

200-500W single output

Features

1.Extensive range input voltage (85-264VAC)

2.Extra Slim product,lightweight

3.Build-in PFC purpose unit.

4.Protections:Short circuit/Overburden/Over voltage

5.CE, Rohs, FC protection recognized standard.

6.Specifically for inside of led lighting effects and in motion indicators.

7.2 years warranty

Technical Specifications:

Item No.		CQ-200W-12V	CQ-250W-12V	CQ-500W-5V	CQ-200W-24V	CQ-250W-24V	CQ-500W-24V
Output	DC Voltage	12V	12V	5V	24V	24V	24V
	Rated Current	16.5A	21A	40A	8.3A	10A	20.8A
	Current Range	0~16.5A	0~21A	0~40A	0~8.3A	0~10A	0~20.8A
	Rated Power	200W	250W	500W	200W	250W	500W
	Ripple & Noise (Max) Note 2	175mVp-p	195mVp-p	165mVp-p	235mVP-p	120mVp-p	160mVp-p
	Voltage Tolerance Note 3	±1.0%	±1%	±1.0%	±1.0%	±1.0%	±1.0%
	Line Regulation	±0.5%	±0.2%	±0.5%	±0.2%	±0.6%	±0.5%
	Load Regulation	±0.2%	±0.5%	±0.5%	±0.2%	±0.6%	±1.0 %
	Set up time,Hold time	200ms, 800ms,1000ms,50ms,20ms at full load
Input	Voltage Range Note. 4	90~250VAC;100~250VAC vary by switch
	Frequency Range	47~63Hz
	Efficiency (Type.)	82%	82%	80%	80%	82%	78%
	AC Current (Type.)	3.15A/115VAC 1.5A/230VAC
	Inrush Current (Max)	cold start 35A
	Leakage Current	<3.5mA / 240 VAC
Protection	Over Load	105 ~ 150% rated output power
	Over Load	Protection short circuit shut down o/p voltage, re-power on to recover
	Over Voltage	13.8~16.2V	13.8 ~16.2V	5.75 ~6.95V	27.6 ~ 32.4V	27.8~32.6V	15.6v ~ 18.2V
	Over Voltage	Protection type: Shut down o/p voltage, re-power on to recover
Environment	Working Temperature	-30 ~ 70°c
	Working Humidity	20 ~ 90% RH non-condensing
	Storage temp & Humidity	-40~+80°c,10~95%RH
	Temp. coefficient	±0.03/ºc (0~50°c)
	Vibration	10 ~ 500Hz,2G 10min/1cycle,period for 60min,each along X,Y,Z axes
Safety and EMC	Safety Standards	IP42 approved
	Withstand Voltage	I/P-O/P,I/P-FG,O/P-FG:100M Ohms/500vdc
	Isolation Resistance	I/P-O/P,I/P-FG:100M OHMS/500VDC
	EMC Emission	Compilance to EN61000-4-2,3,4,5,6,8,11,ENV50204,EN55024,light industry level, criteria A
	EMC Immunity	Comply with EN55022 class B, EN61000-3-2 class A (≤80% load), EN 61000-3-3
Others	MTBF	703Khrs min, MIL-HDBK-217F (25ºC)
Others	Remark: 1.All technical data if not mentioned, it should be measured at 230v,rated load and 25 °c of relative temperature 2.Ripple and noise are tested at 20mhz of bandwidth via 12" twitsted pair-wire terminated with 0.1uf and 47uf parael cap. 3.Tolerance:set up tolerance,line regulation and load regulation are included 4.derating may be loaded with low input voltage, it should double check the detailed static characteristics 5.As power supply need to connected with final terminal equipment, which require the equipment to comply with EMC standard on the complete installation process again