plastic injection machine.
Negotiable /Set
Min.Order:1 Set
Model | 18013 | ||||||||||
Unit | SZ-700A | ||||||||||
Injection Unit | |||||||||||
Screw Diameter | mm | 32 35 | |||||||||
Screw L/D Ratio | L/D | 20 18.8 | |||||||||
Theoretical Shot Volume | cm3 | 112.5 135 | |||||||||
Shot Weight(PS) | g | 101 121 | |||||||||
Injection pressure | Mpa | 232 194 | |||||||||
Theroetical injection rate(PS) | g/s | 62 72 | |||||||||
Plasticising Capacity | g/s | 11 12 | |||||||||
Screw torque | N.m | 390 | |||||||||
Max.screw rotate speed | r/min | 220 | |||||||||
Injection stroke | mm | 140 | |||||||||
Clamping unit | |||||||||||
Max.clamping force | KN | 700 | |||||||||
Max.opening stroke | mm | 290 | |||||||||
Space between tie bars | mm | 320X320 | |||||||||
Mould height | mm | 100-300 | |||||||||
Max.daylight | mm | 590 | |||||||||
Ejector force | KN | 25 |