Specifications
rubber machine1.simple and practical.
2.We have the patent technology.
3.ISO9001, CE
4.Parts Anneal
We manufacture all kinds rubber machine.
rubber mixer,two roll mixing,waste tire recycling machinery,reclaimed rubber machinery,tire vulcanizing press,rubber vulcanizing
Rubber Kneader
1.Rubber Mixer with completely sealed condition,materials are mixed or plasticated under certain pressure,controllable temperature ,which makes high production effciency and obtains excellent quality.
2.Spiral angle and over lapping length of the blades of the rotors are of reasonable design and make the materials to bedispersed uniformly.
3.Surface where is contacted with the materials are all platedwith hard chromium and polished,which is corrosion-resistantand wear-resistant.
4.Jacket construction is adopted in parts that surfaces contactwith materials to achieve excellent water-cooling or steamheating effect and fit in with the needs of plastics and rubberprocessing technology.
5.Feeding from back door on the frame (or a separate top door)is convenient for continuous process operation in aproduction line. The mixing chamber is able to turn forward by 140 aroud the frond rotors to discharge and is easy for changingpigments and cleaning the chamer.
6.Programmable logic controller (PLC) is adopted in theelectric-control system,which has reliable control function andalarm function,and interlock safety-protection function and itis procded with serial interface of net.
Rubber mixing workroom
Type | X (S)N35 | X(S)N55 | X(S)N75 | X(S)N110 |
Total Volume of mixing chamber(L) | 75 | 125 | 180 | 250 |
Working Volume of mixing chamber(L) | 35 | 55 | 75 | 110 |
Driving motor power(KW) | 55 | 75 | 110 | 185 |
Tilting motor power(KW)
| 5.5 | 5.5 | 5.5 | 7.5 |
Tilting angle | 110 | 110 | 110 | 110 |
Rotational speed of the rotor(front/rear) | 36/30 | 36/30 | 36/30 | 30/24.5 |
Pressure of compressed air(Mpa) | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 |
Cooling wate presssure (Mpa) | 0.3~0.4 | 0.3~0.4 | 0.3~0.4 | 0.2~0.4 |
Size:length×Width×Height | 3150×1900×2880 | 3280×2120×3090 | 3250×2210×3250 | 4075×2712×3580 |
Rubber Mixing Mill
1. Electric adjustment mode can reduce labor intensity.
2. There are many speeds and speed ratios available can satisfy most customers' formula and processing requirements.
3. Frame, frame cap and base, looking very nice, are welded and treated by annealing for stress relieving.
4. Chilled alloy cast iron roll is abrasion resistant with long service life.
5. The speed reducer is the hard-tooth surface gear reducer of Class 6 precision, which has long service life and low noise.
6. Perfect emergency stop device can ensure the safety of personnel and equipment.
7. The seal structure with special design can eliminate the leaking phenomenon of lubricating oil.
8. Stock pan is easy to clean up with dislodging device.
9. Modular structure offers various structures for customers' option.
10. The flexible design system can satisfy customers' special design requirements within the shortest time.
11. A load test running will be made to the assembled equipment in our company to save debugging time for customers.
| Technical Parameter | XK-400 | XK-450 | XK-560 | XK-550B | XK-660 |
| Working diameter (mm) | 400 | 450 | 560 | 550 | 660 |
| working length (mm) | 1000 | 1200 | 1530 | 1500 | 2130 |
| Front roll surface speed (m/Min) | 18.65 | 24.26 | 27.72 | 27.94 | 28.6 |
| friction ratio | 1:1.27 | 1:1.27 | 1:1.2 | 1:1.22 | 1:1.24 |
| Max.nip (mm) | 10 | 15 | 15 | 15 | 15 |
| Capacity per batch (kg) | 18-35 | 25-50 | 35-50 | 50-60 | 165 |
| Motor power (Kw) | 37 | 55 | 90 | 110 | 245 |
| Size (l*w*h)(m) | 4.35*1.8*1.8 | 5.2*2.4*1.8 | 5.8*2.3*1.9 | 5.8*2.4*2 | 7.4*3.6*2 |
Rubber Extruder
The machine is used for the extrusion of half-finished rubber products such as tire tread, inner tube, rubber tube. Etc
Features:
1 the machines is equip with inner tube and tire tread extrusion heads, and can also be equipped with other extruding dies as required by users.
2 the machine body is be installed temperature mear suring and indicating device. The feeding zone over model sj-150 is equipped with side rolls for the enhancement of feeding capability.
3 the screws and bushes are subjected to nitrogenation treatment to get nought strength and wear-resistance.
4 the reducer has a forced lubrication unit, which is featured by high transimission efficiency, long service life and low noise.
5 the machine over sj-150 is driven by a variable-speed motor.
6 the side rolls are designed as side-open type for easy rubber removal.
7.Variable-frequency motor home brands
8. Transducer YASKAWA
9. Head unit, body, screw, three parts temperature control system.
10. Use hard gear face reducer.
11. There has adjustable base at the botom of machine, it can adjust height, no fixed one.
Type | XJ-120 | XJ-150 | XJ-200 | XJ-250 |
Forms of screw and screw thread | Double-head convergent type | Double-head unequal-depth | Double-head convergent type | Double-head convergent type |
Screw diameter(mm) | 120 | 150 | 200 | 250 |
Length-diameter ratio of screw(L/D) | 4.6 | 4.43 | 4.35 | 4.5 |
Compression ratio |
| 1.34 |
|
|
Rotary speed of screw | 5.6~55.6 | 20~26 | 22.4~67.2 | 19.7~59.1 |
Motor power(KW) | Electromagnetic speed 22KW | Frequency Control 55kw/motor Commutator18.3-55kw | Frequency Control 55kw/motor Commutator25-75kw | Motor commutator 33.3-100 |
Production capacity(kg/h) | 100~450 | 700~1200 | 1500~2200 | 2000~3200 |
Steam pressure (Mpa) | 0.2-0.4 | 0.6 | 0.6-0.8 | 0.6-0.8 |
Cooling water pressure (Mpa) | 0.2-0.4 | 0.2-0.3 | 0.2-0.3 | 0.2-0.3 |
Size: L×W×H(mm) | 2427×750×1330 | 3411×814×1470 | 4564×1800×1750 | 4950×1150×1483 |
Plate Vulcanizing Press
(1) the center distance in certain, allowed to install large diameter of hydraulic cylinder, which can reduce the hydraulic cylinder the amount, and the simple structure, maintenance is less;
(2) the beam in the section of force is reasonable, the modulus needed than live in small, can reduce weight;
(3) manufacturing installation is simple, pipe configuration, whole hidden appearance tidy and beautiful. Box type flat-band plate vulcanizing machine single box board the lateral stiffness ratio of the poor, but because the mast frame type flat-band plate vulcanizing machine frame by frame board are a combination of multiple, so the machine has enough lateral stiffness.
Rubber plate vulcanizing machine is mainly used for sulfide type tape, it has flat hot plate unit area of pressure equipment reliability in operation and maintenance quantity is little, etc. Plate vulcanizing machine's main function is to provide the pressure and temperature vulcanization required by hydraulic system. Pressure produced by hydraulic cylinder, provided by heating medium temperature. Flat-band plate vulcanizing press press frame structure form mainly divided into pillar type flat-band plate vulcanizing machine and box type flat-band plate vulcanizing machine two classes; According to work layer can have single and double according to the points: hydraulic system working medium pressure and hydraulic pressure may have the points. In flat vulcanizing press rubber industry, pillar type flat-band plate vulcanizing machine is used earlier models, our country the past use of conveyor belt plate vulcanizing machine is also more for pillar type structure, but now it has used more box type structure. Box type flat-band plate vulcanizing machine and pillar type flat-band plate vulcanizing machine, has the following advantages: compared to the center of the 4) in a certain distance, allowed to install large diameter of hydraulic cylinder, which can reduce the hydraulic cylinder the amount, and the simple structure, less maintenance.
Type
Technical requirement |
XLB500 ×500×2 |
XLB600 ×600×2/4 |
XLB700 ×700×2 |
XLB750 ×850×2/4 |
XLB900×900 ×2Q |
Total pressure(MN) | 0.63 | 1.00 | 1.20 | 1.60 | 2.00 |
Plate distance(mm) | 125 | 125 | 125 | 200 | 300 |
Working layer number | 2 | 2-4 | 2 | 2-4 | 2 |
Unit area pressure of hot plateMpa | 2.52 | 2.77 | 2.45 | 2.51 | 2.47 |
Plunger stroke(mm) | 250 | 250/400 | 250 | 400 | 400 |
Heating mode | Electricity/ steam | Electricity /steam | Staam | Electricity /steam | Steam |
Main motor power(KW) | 2.2 | 2.2 | 2.2 | 3 | 5.5 |
Size: L×W×H(mm) | 1750×600 ×1540 | 1880×720 ×1680 | 2000×850 ×1750 | 2250×1200 ×2200 | 1400×900 ×2400 mainframe |
Frame form | Post | Post | Post | Frame | Frame |
Type
Technical requirement |
XLB1400 ×1500 |
XLB1200 ×2700×2 |
XLB1600 ×6000 |
XLBE1200 ×1200 |
Total pressure(MN) | 5 | 7.5 | 24 | 3.15 |
Plate distance(mm) | 450 | 300 | 400 | 450 |
Working layer number | 1 | 2 | 1 | 1 |
Unit area pressure of hot plateMpa | 2.38 | 2.31 | 2.50 | 2.19 |
Plunger stroke(mm) | 400 | 400 | 400 | 400 |
Heating mode | Electricity /steam/oil | Electricity/ steam/oil | Electricity /steam/oil | steam/oil |
Main motor power(KW) | 11 | 18.5 | 26 | 11 |
Size: L×W×H(mm) | 2150×1500 ×2900 | 1780×2890 ×2800 | 6300×720 ×1680 | 1200×1800 ×2140 |
Frame form | Frame | Frame | Frame | Jaw |
Processing Machine
Rubber Technology Exhibition
Company Information
Qingdao Shenghualong Rubber Machinery Co., Ltd is the biggest and best rubber machinery factory in Qingdao,China. As one of main manufacturers engaging on manufacturing rubber machinery in Qingdao Area, taking "Product quality first and client's credit standing uppermost" as corporate faith, the company strictly carries out inner management, wins markets depending on high-quality products and satisfies client's demands with lower price, excellent after-sale service and full varieties. Therefore, it has been appraised as "Qingdao Municipal Advanced Unit on Both Material & Spiritual Civilizations Constructing" for successive years and "Contract-stressing and Promise-keeping Unit" by Qingdao city for successive thirty years.
The company adopting advanced manufacturing technics and detection instruments, manufacture waste tire recycling machine, rubber granule production line, reclaimed rubber machinery, tyre machinery, rubber vulcanizing machine, rubber extruder, rubber cooling line, rubber refining machinery, rubber strainer etc. Products are exported to India, Russia, the united Arab emirates, Iran, Egypt, the United States, Mexico, Brazil, Turkey, Indonesia, Malaysia, etc. All over the world.
Commpany Honors