Technical parameter

Width (mm):………………………………………………………660mm

Stroke(mm):………………………………………………………680mm

Total pressure of oil cylinder:…………………………………….≈80KN

Diameter of oil cylinder:………………………………………..φ140mm

Time taken by the stroke:…………………………………………13-16/s

Working oil pressure:…………………………………………….5.2MPa

Power:……………………………………………………………..5.5KW

Main Uses:

This rubber cutting machine/cutter/bale splitter is mainly used to cut the natural rubber, synthetic rubber, and other plastic materials into gommures / pieces, which is convenient to mix; especially it is suitable to be installed near the rubber mixer to cut small piece of rubber.

Structure:

This Rubber Cutting Machine mainly consists of rubber knife, frame, cylinder, base, auxiliary table, hydraulic system, and electric system and etc. Simple structure, convenient to operate.

Features:

1' The lead is casted on the base right under the rubber knife for protecting the edge of the rubber knife.

2' Two limit switches are installed on the frame to control the reversal valve to control the movement direction of the rubber knife, at the same time it protects the cover of the cylinder.

Simple structure, convenient to operate, high production efficiency, reduce labor intensity.