Product Details

Specifications

Tungsten carbide inserts/cutting tools with carbide tips R52. 100% virgin material Various grade available
Nice quality

Tungsten carbide inserts/cutting tools with carbide tips R5

We are the one of leading manufacturers in zhuzhou city, which is the hometown of tungsten carbide .

We specialize in series of tungsten carbide products, such as cold forging die cores, brazed tips, disc cutters,

plates and boards, saw tips, round rods, rock drilling bits and buttons, milling tools, geological exploration drill
tools and so on. Our production are exported to UK, European, Japan, Taiwan and South-east Asia etc. And we have passed ISO 9001:2000 in the year of 2003.

Here in the following are introductions of some performance and applications of some grades:

Grade:YG6 YG8 YT5 YT15 ZP10 ZP20 ZK10UF ZK20UF

Type: CNMG CCMT CNMM DNMG DCMT SNMA

SCMW SNMG TCMT TNMG TNMM TPGN

VBMW VNMG WNMA etc.

Grade

ISO Code

Density

T.R.S

Hardness

Performance & application recommended

g/cm3

MPa

HRA

YM6X

K10

14.95

1800

91.5

The finishing & semi-finishing of cast iron and nonferrous metals and also for the machining of manganese steel and hardening steel.

YM6

K20

14.95

1900

90.5

Suitable for the roughing of cast iron and light alloys and also for the milling of cast iron and low-alloy steel.

YM8

K20

14.80

2200

89.5

Suitable for finishing and semi-finishing of stainless steel and conventional alloy steel.

YW1

M10

13.10

1600

91.6

YW2

M20

13.00

1800

90.6

The grade can be used for the semi-finishing of stainless steel and low-alloy steel and it is mainly used for the machining of railway wheel hubs.

YT15

P10

11.4

1600

91.5

Suitable for the finishing and semi-finishing for steel and cast steel with a moderate feed rate and rather high cutting speed.

YT14

P20

11.6

1700

90.8

Suitable for the finishing and semi-finishing of steel and cast steel.

YT5

P30

12.9

2200

90.5

Suitable for the heavy duty rough turning of and cast steel with a big feed rate at a medium and low speed under unfavorable working conditions.

YS8

M05

13.9

1800

92.5

It can be used for the finishing of iron based and nickel based high-temperature alloys and high-strength steel and it can also be used for the finishing of chilled cast iron,heat resistant stainless steel,high manganese steel and harden steel

YC30S

P30

12.9

1700

Suitable for the milling of steel and cast iron,the have good performances of crack-resistance and toughness

Other grades may be offered by customers' requirements.

All the products must be inspected strictly with the ultrasonic and only those haven't any harm such as pore canbe shipped out. High density,

high wear&impact resistance,which lead them a long lifetime.