Specifications

die forged parts/ forging die block/ die forging mold
1.Tungsten carbide forging die
2 .precision and polish

zhuzhou tungsten carbide cold forging dies/ hot forging dies 

 

Tungsten carbide cold heading die for cold punching and heading of screws and nuts. High impact resistance .Toughness ,wear resistance,and quality consistency.You are encouraged to use our professional carbide grades for cold heading &punching die nibs. Power metallurgical Compacting dies and other industries.For stable performance and high-cost-effectiveness.They have been proved to be ideal in making

non-ferrous metal , ferrous metal and their alloys.

 

we can offer different size by customer's design 

 

TYPE	fundamental dimensions
	d	D	L
BD0101015	10	1	15
BD0131015	10	1.3	15
BD0171020	10	1.7	20
BD0171230	12	1.7	30
BD0211015	10	2.1	15
BD0211230	12	2.1	30
BD0211630	16	2.1	30
BD0241015	10	2.4	15
BD0241225	12	2.4	25
BD0291215	12	2.9	15
BD0291425	14	2.9	35
BD0291640	16	2.9	40
BD0341225	12	3.4	25
BD0341435	14	3.4	35
BD0341637	16	3.4	37
BD0391420	14	3.9	20
BD0391625	16	3.9	25
BD0391630	16	3.9	30
BD0392255	22	3.9	55
BD0431425	14	4.3	25
BD0431640	16	4.3	40
BD0432230	22	4.3	30
BD0471615	16	4.7	15
BD0471840	18	4.7	40
BD0472225	22	4.7	25
BD0642242	22	6.4	42
BD0722255	22	7.2	55

 

Grade				Performance & application recommended
	Density	T.R.S	Hardness
	g/cm3	MPα	HRA
A	13.5	3000	83.5	Good wea ristance and  high bending strength. Primariy for nut forming dies and high impact resistance forging dies.
YM11	14.4	2420	88.5	Forming or stamping dies for metal powders and nonmetal powders.
YM15	14.0	2500	87.5	For fabricating drawing dies of stain tubes and rods under High compressibility ratio;punching, stamping ,froging tools under large stress.
YM20	13.5	2800	85.5	For fabricating of stamping dies for watch parts, spring plates of musical instruments,  batters jars, small sized steel balls, screws, screw caps.
ML32	13.9	2750	85.5	Impact resistance forging dies
ML35	13.7	2800	84.5	Impact resistance forging dies, hot-press forging dies and rollers.
ML40	13.5	2850	83.5	Dies for resistant or impact resistant application.
ML50	13.3	2900	83.0	Nut forming dies and high impact resistance forging dies.
ML60	13.1	2950	82.5	Stainless bolt header dies and rollers.
ML90	13.3	3200	82.0	Screw cap forming dies with high impact resistance ( Highest impact resistance forging dies).
Other grades may be offered by customers' requirements

 

 

 

 

Grade and appliacation

 

 

grade	Equal to ISO	Density (g/cm3)	TRS (N/mm2)	Harness (HRA)	USE
YG11C	K40	14.35	2200	87.6	Forming or stamping dies for metal powders and nonmetal powders.
YG15	K40	14.0	2300	86.5	For fabricating drawing dies of steel tubes and rods under high compressibility ratio;punchingstampingforging tools under large stress.
YG15C	K40	14.0	2500	85
YG18C	K40	13.7	2700	84.5	Impact resistance forging dies,hot-press forging dies and rollers.
YG20	K40	13.5	2400	4	For various dies made by cold forging,cold stamping and hot forging.
YG20C	K40	13.4	2600	81-82	Dies for wear resistant or impact resistant application

 

Tight  Packing

 

we are manufacturer, not just trade

welcome to visit our factory ,

address No:88 Mingri Road,Liyu Industrail Area,Tianyuan District,Zhuzhou City,Hunan Province,China.

 

 

Main Products

 

 

 

Certification and reputation

 

 

 

 

We are Zhuzhou Mingri Cemented Carbide Co,.Ltd  fouce on producing high quality cemented carbide products for 13 years.

our products have good reputation all over the world