Product Details

Specifications

cemented tungsten carbide circular paper cutter
1 speed faster
2. with long tool life
3.good service

Product Description

General information:

Tungsten carbide disc cutter is supplied in a range of standard sizes for wood and steel-sawing

applications.

These kinds of carbide disc cutters are specially manufactured for cutting off and slotting metal materials such as plain steel, chilled steel, aluminum and copper as well as difficult-to-machine materials such as stainless steel, titanium alloys and printed circuit board.
Our tungsten carbide disc cutters are precision made to a high standard, with specially ground finish and tooth. Compared with the high speed steel saw, it can perform high speed cutting, with a high machining efficiency, accurate slitting and good surface finish.

Advantages of our products:

1. Good toughness

2. Superior wear resistance & high strength

3. A comprehensive range of types

Grade & app & type

Grade & application for solide cemented carbide disc round cutters

Grade	Equal to ISO Category Number	Performance			uses
		Density	Bend Strength	Hardness
		G/Cm3	N/mm2	HRA
YG3	K01	14.9-15.3	≥1180	≥90.5	sand-blasting nozzlesQualified for fine turning and half-fine turning when cast iron, non-ferrous metal, alloys as well as non-alloy materials cutting consecutively. Can make wire drawing of steel and non-ferrous metal. Also qualified for sand-blasting nozzles.
YG3X	K01	15.1-15.4	≥1300	≥91.5
YG6X	K10	14.8-15.1	≥1560	≥91.0	Qualified for machining of chilled cast iron, alloy cast iron, refractory steel and alloy steel. Also Qualified for the machining of common cast iron.
YG6A	K10	14.7-15.1	≥1580	≥91.0
YG6	K20	14.7-15.1	≥1670	≥89.5	Qualified for finish machining and semi-finish machining for the cast iron, non-ferrous metal, alloy and unalloyed materials. Also qualified for wire drawing for the steel and non-ferrous metal, electric drill for geology use and steel drill etc.
YG8	K20-K30	14.6-14.9	≥1840	≥89	Qualified for rough machining of cast iron, non-ferrous metal, nonmetal materials, drawing of steel, non-ferrous metal and pipes, various drills for geology use, tools for machine manufacture and wearing parts.
YT15	P10	11.1-11.6	≥1180	≥91.0	Qualified for rough machining, semi-finish machining and finish machining during consecutive machining of carbon steel and alloy steel.
YT14	P20	11.2-11.8	≥1270	≥90.5	Qualified for rough machining for rough face of carbon steel and alloy steel, half process during discontinuity cutting.
YT5	P30	12.5-13.2	≥1430	≥89.5	Qualified for rough machining for rough face of carbon steel and alloy steel and discontinuity cutting.
YW1	M10	12.7-13.5	≥1180	≥91.5	Qualified for finishing and semi-finishing machining of refractory steel, high manganese steel and common steel.
YW2	M20	12.5-13.2	≥1350	≥90.5	Qualified for semi-finishing machining of refractory steel, high manganese steel and common steel.

Types & sizes of solide cemented carbide disc round cutters