Specifications

2014 new compound crusher machine
1.high crushing ratio
2.large output
3.high efficiency

2014 new compound crusher machine 

I.Compound Crusher Usage and Application

The machine is fine crushing equipment that crushes materials in middle hardness, such as rocks and mines with pressure strength less than 210MPa and humidity less than 5%. E.g. limestone, dolomite, cement clinker, iron ore, molybdenum ore, aluminum, cobble, rock phosphorite, copper ore, burned magnesite, serpentine, calces, gypsum, lump coal, zeolite, sandstone and so on. It is widely used in the industry of mining, metallurgy, building materials, fireproof materials, cement, coal, glass, chemical industry, electricity power and so on.

 

 

II.Compound Crusher Working Principle

The motor drives the rotor that fixed on the main bearing to run quickly toward certain direction when the machine works. The materials are fallen into the throw-up disc and impacted by the high speed strips of the throw-up disc, and then strikes with the impact board under the effect of Centrifugal Force.

Because the impact board is bevel and the gravitation, the materials are threw to the taper crushing room and impacted by the high-rotating up hammerhead. After gaining sufficient energy, the materials are thrown to the impact board again and action repeats. The materials strike with each other in the crushing room and then are down to the column-shape rotor room. Then crushed, pressed, and ground and action repeats. In this way, the materials go through up, middle, and down rotor crushing rooms and crushed, pressed, and ground by the hammers and the impact boards, and finally the materials are gradually crushed into needed sizes and come out.

 

 

III. Compound Crusher Features

The machine has special structure in the part of throw-up disc, which can improve the usage of abrasive material and reduce the cost. The wearing parts are made of anti-abrasion material (metal alloy in high hardness and toughness), so it can endure for long time. It has the advantage of high crushing ratio, large output, high efficiency, and low consumption. It is of easy operation, good performance, low noise, little vibration and good airproofing, so it is a high efficient and high level fine crushing equipment.

 

 

IV. Compound Crusher Main Specifications

Type	Capacity (t/h)	Feed size (mm)	Discharge size (mm)	Main shaft Rotation speedr/min	Motor		Dimension(mm)	Weight (t)
					Type	Power kw
PCL750	12-15	≤80	0-5	720	Y200L-4	30	2000×1100×1375	3.1
PCL1000	25-30	≤90	0-6	500	Y280M-6	55	2690×1500×1600	4.6
PCL1250	35-40	≤100	0-7	420	Y315M1-8	75	3270×1600×1900	6
PCL1500	55-70	≤120	0-8	400	Y315M3-8	110	3400×2000×2300	9.5
PCL1750	80-100	≤150	0-9	380	Y315M3-8	160	3710×2360×2390	15
PCL2000	110-130	≤180	0-10	370	Y315M3-8	185	4100×2660×2620	20

 

 

Our certificates

 

 

This specification is just for reference, any changes are subject to the products.

 

 

Order Online:

 

If you're interested in the product, please submit your requirements and contacts and then we will contact you in two days. We promise that all your information won't be leaked to anyone.