Product Details

AC Servo Motor and Servo Driver 60mm, 3000rpm, 200W-400W

Ac Servo Motor 60mm

Part I 60MST series ac servo motor

1. Specification

Model	60MST-00630										60MST-01330
Rated power (W)	200										400
Matched driver	MST-1210A										MST-1210A
Rated voltage (V)	220										220
Rated current (A)	1.5										2.8
Rated speed	3000										3000
Rated torque	0.637										1.27
Peak torque	1.911										3.8
back emf	28										28
Torque coefficient	0.42										0.5
Rotor inertia (Kg.m²)	0.17×10 -4										0.302×10 -4
Winding resistance (Ω)	11.6										5.83
winding inductance	22										12.23
Electrical time constant	1.9										2.1
Weight	1.11										1.33
Encoder wires count	2500										2500
Motor insulation level	Class B(130℃)
Defend level	IP64
Operation environment	Environment temperature: -20 ℃~+50 ℃ Environment moisture<90% frost-free knot
Motor winding rocket	Winding wire			U (red)			V (yellow)					W (blue)				PE(Olivine/black)
	Socket number			1			2					3				4
Encoder socket	Signal wire	5V	0V	B+	Z-	U+	Z+	U-	A+	V+			W+	V-	A-		B-	W-	PE
	Socket number	2	3	4	5	6	7	8	9	10			11	12	13		14	15	1

2. Ac Servo Motor 60MST series Installation size

Motor power	200W	400W
LA	102	122
LB	30	30
LC	3	3
LD	7	7
LE	50	50
LF	60	60
LG	70	70
LZ	5.5	5.5
S	14	14

3. Cautions for Ac Servo Motor

1. Please do not hard knock the ac servo motor when Install and teardown motor, in case break encoder.

2. Please try to avoid the axis seat shake, in case break the bearings.

Ac Servo Driver

Part II Servo Driver for AC Servo Motor

Model: MST-1210A/1220A/1230A/1250A/1350A

Special:

1. Customized service: OEM/ODM

2. Provided Low-voltage Servo Driver, Middle-end and High-end Servo Driver

Feature:

1. Incremental photoelectric encoder 2500 line, high positioning accuracy, rotary positioning accuracy can reach 1/10000 r

2. Speed than the big, 00 to 1:50, from low to high speed stable torque characteristics;

3. The highest a high-speed FPGA processing, motor velocity 5000 RPM;

4. Rich complete parameter Settings, different ways of working can be configured and running characteristics, so as to adapt to different requirements;

5. Have the position, speed, torque control mode, the application range;

6. Using intelligent control algorithm of space vector (SVPWM), greater than traditional SPWM generate the noise of the moment and smaller;

7. Up to three times the overload design, stronger load ability;

8. Perfect protection function: over current, over voltage, overheating and encoder failure, etc.;

Parameter:

Input Voltage	AC220V -15%~+10%
Current	10A	20A	30A	50A
Matching Motor	≤400W	400W-750W	750W-1500W	2000W-3800W
Using Temperature	Work:45℃ Storage:-40℃~55℃
Relative Humidity	40%~80% with no condensation
Atmosphere	86-106kpa
Control Mode	1.Position control 2.JOG control 3.Speed control 4.Torque control 5.Position and speed control 6.Inside pulse control 7.Electric tool carrier control
Pulse Command	7.Pulse+ Direction 2.CW + CCW Pulse 3. Two-phase AB orthogonal pulses
Control Precision	0.01%
Response Frequency	≤200Hz
Pulse Frequency	≤500kHz
Speed Ratio	1:5000
Regenerative Brake	Internally Installed
Electronic Gear	1/30000~30000/1
Overload Capacity	≤300%
Feedback Pulse	2500p/r, Frequency division can be set arbitrary within 0-128
Display Function	Motor speed, motor current, motor torque, motor position, the position deviation, the number of command pulses, the pulse frequency, the straight-line speed, input and output diagnostic
Protection Function	Over speed, over current, overvoltage, under voltage, overload, super bad, encoder fault, the temperature is too high, the internal chip failure, module failure

Dimension

External Connection Diagram for Ac Servo Motor and Servo Driver

Ac Servo Motor link

1. Ac Servo Motor for Milling CNC Controller

http://preview.china.cn/product/60324071502-801849542/New_MST_8140S_cnc_milling_controller.html

http://preview.china.cn/product/60317351177-801849542/Factory_supply_CNC_precision_milling_machine_CNC_Controllers.html

2. Ac Servo Motor for Lathe CNC Controller

http://preview.china.cn/product/60312836950-801849542/2015_New_Produce_high_quality_cnc_lathe_controller.html

http://preview.china.cn/product/60302062471-801849542/CNC_Lathe_Controller.html

3. Ac Servo Motor for Plasma/Flame Cutting Controller

http://preview.china.cn/product/60316167100-801849542/High_quality_3_Axis_step_plasma_cutting_cnc_cutting_controller_with_high_quality.html

4. Ac Servo Motor for Injection Molding Machine Controller

http://preview.china.cn/product/60329525636-801849542/Specifically_designed_168MIPS_processor_high_quality_injection_molding_machine_controller.html

International Express, by air/sea

Our Services