Fire resistant fireproof polyurethanel Foam 

Fire Retardant PU Foam is a one-component, self-expanding, ready-to-use, multi-purpose Polyurethane foam. The foam 

will expand and cure by moisture in the air. It is used for a wide range of building applications. It is very good for filling and 

sealing with excellent mounting capacities, high thermal and acoustical insulation. It will stop burning when there is not fire 

contact. It is environmental protection as it contains CFC-free propellants.

  Scope of Application: polyurethane foam                                                                                                         

It can be used to fill the edges of doors or windows or expansion clearance of the engineering;to prevent water or leakage;to seal and insulate the pipe lines,wire connectors and the sockets in the cornert of the water and electricity projects;to caulk all kinds of slots,cracks,holes and openings to prevent leakage;and to fill the exterior wall's or curtain wall's slot;to complete the roof edges;to contect the ceiling,the decotated board and the door panel;the seal the cold store and the refrigerator car to preserve heat; to caulk the cracks for installing the air aondition or sanitary wares,or to pack the gardening sceneries,the ikebana or the frangible'or to isolate the places from noises,heat or leakage.

Use by gun: polyurethane foam

Step 1. Shake the can at least 30 times.

Step 2. Clean and dampen the place where will be filled.

Step 3. Place the can upside down and screw it on the adapter; counter clock wisely open the control valve to have a appropriate flow.

Step 4. Spray the foam from down to up; fill 80% volume of the gap is ok.

Step 5. The tack-free time is about 10 minutes; the foam can be processed after 1 hour.

Step 6. The foam can be trimmed by knife; then its surace can be processed by cement, coating, paint, silicone and so on.

  Use by screw: polyurethane foam

Step 1. Shake the can at least 30 times.

Step 2. Clean and dampen the place where will be filled.

Step 3. Place the can upside down and screw the tube on the can; counter clock wisely open the control valve to have a appropriate flow.

Step 4. Spray the foam from down to up; fill 80% volume of the gap is ok.

Step 5. The tack-free time is about 10 minutes; the foam can be processed after 1 hour.

Step 6. The foam can be trimmed by knife; then its surace can be processed by cement, coating, paint, silicone and so on.

Shanghai shuode is one of the earlist companies which manufacture polyurethane foam in China. Established in 2003,shuode is an integrated production and processing bass with annual production capacity of 50 million cans.With 12 years development,shuode has been a banner of polyurethane foam industry. polyurethane foam

It is the pioneer of Magic style is prefoamed and has high expansion,little shrinkage,Its quality is in the international level. polyurethane foam

Shuode's products were awarded the "high-tech environment-friendly products".Simultaneously the state ministry of science and technology,the ministry of construction and the nine national agencies awardes shuode as <The most influential brand of China's building materail industry> and many other honors.Its products have good market in home and broad.

Shuode has been adhering to the core conception---gratitude and responsibility,nnovation and hard work,integrity and cooperation to create a better future.Shuode was located in professinal and deccated to ceate the first brand of domestic industry. polyurethane foam

1.OEM is available. polyurethane foam

2.Samples can be supplied. polyurethane foam

3.Big order with big discount. polyurethane foam