High density liquid polyurethane foam manufacturer   

FA  pu foam is a one component, economical type and good performance pu foam . It is fitted with a plastic adapter

 head for use with a foam application gun or a straw. The foam will expand and cure by moisture in the air. It is used for a wide range of

 building applications. It is very good for filling and sealing with excellent mounting capacities, high thermal and acoustical insulation.

  Scope of Application: pu foam

It can be used to fill the edges of doors or windows or expansion clearance of the engineering;to prevent water or leakage;to seal and insulate the pipe lines,wire connectors and the sockets in the cornert of the water and electricity projects;to caulk all kinds of slots,cracks,holes and openings to prevent leakage;and to fill the exterior wall's or curtain wall's slot;to complete the roof edges;to contect the ceiling,the decotated board and the door panel;the seal the cold store and the refrigerator car to preserve heat; to caulk the cracks for installing the air aondition or sanitary wares,or to pack the gardening sceneries,the ikebana or the frangible'or to isolate the places from noises,heat or leakage. pu foam is pu foam.

   Use by gun: pu foam is pu foam.

Step 1. Shake the can at least 30 times.

Step 2. Clean and dampen the place where will be filled.

Step 3. Place the can upside down and screw it on the adapter; counter clock wisely open the control valve to have a appropriate flow.

Step 4. Spray the foam from down to up; fill 80% volume of the gap is ok.

Step 5. The tack-free time is about 10 minutes; the foam can be processed after 1 hour.

Step 6. The foam can be trimmed by knife; then its surace can be processed by cement, coating, paint, silicone and so on.

  Use by screw: pu foam is pu foam.

Step 1. Shake the can at least 30 times.

Step 2. Clean and dampen the place where will be filled.

Step 3. Place the can upside down and screw the tube on the can; counter clock wisely open the control valve to have a appropriate flow.

Step 4. Spray the foam from down to up; fill 80% volume of the gap is ok.

Step 5. The tack-free time is about 10 minutes; the foam can be processed after 1 hour.

Step 6. The foam can be trimmed by knife; then its surace can be processed by cement, coating, paint, silicone and so on.

Shanghai shuode is one of the earlist companies which manufacture polyurethane foam in China. Established in 2003,shuode is an integrated production and processing bass with annual production capacity of 50 million cans.With 12 years development,shuode has been a banner of polyurethane foam industry. pu foam is pu foam.

It is the pioneer of Magic style is prefoamed and has high expansion,little shrinkage,Its quality is in the international level.

Shuode's products were awarded the "high-tech environment-friendly products".Simultaneously the state ministry of science and technology,the ministry of construction and the nine national agencies awardes shuode as <The most influential brand of China's building materail industry> and many other honors.Its products have good market in home and broad.

Shuode has been adhering to the core conception---gratitude and responsibility,nnovation and hard work,integrity and cooperation to create a better future.Shuode was located in professinal and deccated to ceate the first brand of domestic industry. pu foam is pu foam.

1.OEM is available. pu foam is pu foam.

2.Samples can be supplied.

3.Big order with big discount.