Product Details

PCBA board for mini customized GPS Tracker

----- Brief Introduction -----

Working based on existing GSM/GPRS network and GPS satellites, this product can locate and monitor any remote targets by SMS, APP and Internet. It adopts the most advanced technology of GPS and AGPS dual positioning.

Content	Specs.
Dim.	50mm x 30mm x 15mm
Weight	28g
Network	GSM/GPRS
Band	850/900/1800/1900Mhz
GPS chip	UBLOX
GPS sensitivity	-159dBm
GPS accuracy	5m
Time To First Fix	Cold status 35-80s Warm status 35s Hot status 1s
Wall charger	110-220V input 5V output
Battery	Chargeable 3.7V 500mAh Li-ion battery
Standby	120 hours
Storage Temp.	-40°C to +85°C
Operation Temp.	-20°C to +55°C
Humidity	5%--95% non-condensing

----- Product Display -----

----- Functions Explanation -----

GPS and Location Based Service
Location Based service also named A-GPS, when tracker in underground or tunnel ,can get location by AGPS.
Real time tracking
Real time tracking it by cell phone and platform . Also can support get location every 5 seconds, and the GPS accuracy is 5m .
Check the history of route on platform
Can check and replay within one year history of route of device ,by web monitor center
Monitoring and communication
Can hear the voice around the tracker by cell phone . Also support communication with the tracker by cell phone (OEM)
Power Saving Mode
The device go into standby mode when there isn't vibration for 3 minutes , it will go into working mode when it feel vibration
Google map on mobile
Check the location with google map on mobile.
Geo-fence and movement alert
Set up a geo-fence for the unit to restrict its movements within a district ,unit will send a message to the authorized numberwhen it breaches the district..
Low Battery Alarm

LED flash remotely control

----- Faults & The solutions -----

Faults	Solution
Startup Fail	Check the battery and see if it is fully charged or correctly installed.
Hang up Fail	In existence of an authorized number, an unauthorized number dials up the unit. Please initialize the unit and re-set up the authorized numbers.
Monitoring failure	Please check the authorization number is set to the correct time
No GSM Signal	Please make sure SIM Card is GSM Net and installed correctly; also call display should be on; but no call transfer and PIN code off.

----- Factory Show -----

----- Why Choose Us -----

Professional technology, design team, Perfect service. Soonest feeback.