Infant incubator

BB-200 Luxurious

1.Microprocessor based servo controlled temperature system

2.Color touch screen with skin temperature graph trends

3.Control modes: Air mode and baby skin mode

4.Humidity control and oxygen concentration control system

5.Baby weight system, two skin sensor for measurement of central and peripheral temperature

6.Set temperature, air temperature, baby skin temperature, humidity, oxygen concentration,SPO2, baby weight, timer and heating power are displayed separately by LCD

7.Self - testing function, various failure alarms by audible and visual

8.>37℃ temperature set function

9.Embedded integrated sensor module

10.Triple protection for over temperature with separate cut off device, more safety system

11.The inclination of infant bed is adjustable

12.Double wall hood, 4 operating windows and 2 iris ports

13.Independent locking device for front door ;

14.RS232 connector, Oxygen inlet

15.X ray cassette Tray; Electric height adjustable ; SPO2, CCD camera 

1. Power supply: AC110/220V 60/50Hz

2. Power input: ≤ 650VA

3 Optional parts:

a. Environment temperature: 20~30℃

b. Environment relative humidity: 30%~75%RH

c. Environment air velocity of flow: <0.3m/s

d.Ambient air pressure: 700 hPa -1060 hPa

4.Air Temperature control range: 25℃-37℃, 37.1℃-38℃

5. Skin temperature control range: 32℃～37℃, 37.1℃～38.5℃

6. Skin temperature sensor accuracy: +/-0.3℃

7. Temperature fluctuation: +/-0.5℃

8. Uniformity of mattress temperature: ≤ 0.8℃

9.Warm-up time: ≤ 45min

10Humidity display range:10%-95%RH

11. Humidity accuracy: ≤ 10%RH

12.Humidity control range:20%-60%RH

13.Oxygen concentration display range :10%-95%

14.Oxygen concentration sensor accuracy :+-2%

15.Oxygen concentration control range:20%-60%

16.Oxygen concentration control accuracy:+-4%

17. Internal noise level: ≤ 55dB

18. Infant bed tilt angle: +/-10 degree

19. Mattress size: 65cm(L)X 37cm(W)

20. Trough capacity: 1200ml

21. Air filter: 0.5um

22.Max CO2-concentration is 0.4%

23.Alarm:

a.The over temp of air temp : 38℃

b.The second thermal cut-out temperature: 40℃

c.The alarm for deviation: - Air temp: ±3.0℃ - Skin temp : ±1.0℃

d.Alarm for Sensors:

When the skin (or air) temperature sensor is shut off or short circuit，cut off the heater，give out alarm with sound and light .

e.Alarm for power failure

The power fails，give out alarm with sound and light.

f.Alarm for fan failure

The fan stops working or has fault, give out alarm with sound and light and cut off the heater power.

g.Low water level

When the water level in trough is lower than rated level, low water level caution light is on.

h.Oxygen concentration deviation:+-5%