Baby Incubator

BB-100 Standard

1. Microprocessor based servo controlled temperature system

2. Air Temperature ,Heating power displayed by LED

3. Alarm functions: Power failure; Over temperature; Temperature deviation; Temperature sensor failure; Fan failure;

4. >37 ℃ temperature setting

5. A keypad lock prevent inadvertent changes the setting

6. A second thermal cut-off function for more safety

7. Humidity is adjustable in two grade

8. The infant bed inclination angle is adjustable continuously

9. Trough for pulling and pushing, which is convenient to add water and wash

10. Fan with low noise and long life-span

11. Temperature deviation and over temperature could be amended in front panel directly

12. Slience/reset button for alarms

13. Six operating windows, two sides access operating windows can be swiveled

14. Support bracket

15. Heater is electrically cut-out if air temperature inside incubator exceed 40 ℃

16.RS232 Connector

17.Monitor Tray

18. Control part can be pull out in whole,convenient for clean and maintain

1. Power supply: AC110/220V 60/50Hz

2. Power input: ≤ 650VA

3 Optional parts:

a. Environment temperature: 20~30℃

b. Environment relative humidity: 30%~75%RH

c. Environment air velocity of flow: <0.3m/s

d.Ambient air pressure: 700 hPa -1060 hPa

4.Air Temperature control range: 25℃-37℃, 37.1℃-38℃

5. Temperature fluctuation: +/-0.5℃

6. Uniformity of mattress temperature: ≤ 0.8℃

7. Humidity accuracy: ≤ 10%RH

8. Warm-up time: ≤ 45min

9. Internal noise level: ≤ 55dB

10. Infant bed tilt angle: +/-10degree

11. Mattress size: 65cm(L)X 37cm(W)

12. Trough capacity: 1200ml

13. Air filter: 0.5um

14.Max CO2-concentration is 0.4%

15.Alarm:

a.The over temp of air temp : 38℃

b.The second thermal cut-out temperature: 40℃

c.The alarm for deviation: - Air temp: ±3.0℃

d.Alarm for Sensors:

When the Air temperature sensor is shut off or short circuit，cut off the heater，give out alarm with sound and light .

e.Alarm for power failure

The power fails，give out alarm with sound and light.

f.Alarm for fan failure

The fan stops working or has fault, give out alarm with sound and light and cut off the heater power.