Specifications

UHF frequency transmission
Mini CPU control
Unique software program ensures post amp and speakers's safety
Audio/noise lock

C-MARK C-782T wireless microphone is adopted by UHF frequency transmission. This is controlled by mini CPU control (PLL integrated Technology) which enhances the frequency more stable. The working range is 710MHz~865MHz where programmed 100 frequency combinations make the channels interchangeable. Advanced audio and noise lock by dual mute control technology, avoids the interruption from any noise signal. The anticipated decline function of CPU, settles the weakness of interval break at the audio output from working distance of receiver. The working condition of receiver is illustrated by LED backlight display. So it is more visible to operate. The main body provides balanced and unbalanced output. Both receiver and handheld microphone adopt unique software program which controls power-on and power-off. No matter what situation the whole system is in, there is no shock from power-on and power-off, and therefore the safety of post amp and speakers is ensured.

 

FEATURES

1. PLL design.
2. Functions of UHF 100 frequency PLL digital lock and automatic message selection;
3. Built-in mute and audio code lock circuit destory interference.
4. Specially designed circuit of anti-interference.
5. Super-High dynamic double compression diversity technology. high and low vocal Frequency input separately, perform excellent dynamic features. 
6. Independent power switch, providing balanced and imbalanced outputs and such Function Buttons as DOWN, UP, MENU, SET, and so on available

• C-782T Wireless Receiver
Carrier Frequency Range: 710MHz---865MHz 
Frequency Preparation: PLL
Total Channel: 100 CH 
Frequency Response: 50Hz---18KHz 
Receiving Distance: 300 feet 
Bandwidth:24MHz 
Carrier Stability: ±5PPm ≤ 10KHz 
Image Reject: >80dB 
S/N Ratio:>105dB(1KHz-A) 
Sensitivity:-105dBm(12dB S/N AD) 
T.H.D: < 0.5% @ 1kHz 
Audio Output Impedance: 2.2kΩ 
Audio Output Level: -12dB 
Mute Mode:Mute & Tone Key Squelch 
Function Display : LCD 
Power Supply:12-18v Dc, 600mA 
Output Connection:balanced XLR connector, or unbalanced TRS 6.3 mm connector

• CF06T Handheld Transmitter
Dynamic Range: >110dB 
Carrier Phase Errors: ±0.005% 
Deviation: ±48KHz 
Sub-harmonic: <-60dBc 
RF Output Power: 10mW 
Power Consumption: ≤100mA @ 3 V 
Power Supply:Um3, AAA 1.5v×2 ″ 
Function Display: LCD

• CF02T Body Pack Transmitter
Frequency Preparation: PLL 
Carrier Frequency Range: 710MHz---865MHz 
RF Output: 10mW 
Sensitivity: ± 0.005% 
Bandwidth:24MHz 
Frequency Interval: 75 KHz 
Switchable Frequencies:320CH 
LCD: Frequency, Battery Volume
Control Mode:Power Switch,Mode setting,AF, Frequency Up/Down,HOLD Function
Image Rejection: <-50 dBC 
Audio Response: 40Hz-18KHz 
Battery:UM3, AA 1.5V*2

• CF07T Headset Microphone
Cartridge:Back Electret condenser 
Directional Pattern:cardioid
Acoustical operating principal:Pressure Gradient ,FET preamp 
Frequency Response: 50-18000Hz 
Sensitivity: -42dB(7.9mV/Pa) 
Impedance:2.2KΩ Up to power supply output circuit change of body pack transmitter and microphone
Load Impedance:Min 11KΩ change according to power supply output circuit change of body pack transmitter and microphone
Equivalent Sound Leve:25 dBA 
Maximum SPL:130dB(Harmonic Distortion ≤ 0.5% 1000 Hz) 
S/N Ratio:70dB 
Dynamic Range: 113dB 
Power Supply:1.5V-10V DC 
Current Consumption:3.5mA 
Output Connection:3 pin or 4 pin mini XLR connector or 3.5mm connector

• CF03T Collar-worn Microphone
Cartridge:Back Electret condenser
Dimension:Φ6.0X5mm 
Directional Pattern: Cardioid
Frequency Response:50Hz-16KHz 
Sensitivity:-45dB±3dB/Pa (1KHz)(5.6mV/Pa) 
Output Impedance:250Ω±30% 
Load Impedance(Min) :1250Ω 
Equivalent Sound Level:21dBA 
Maximum SPL:130dB(harmonic distortion ≤ 0.5% 1000 Hz) 
S/N Ratio:70dB 
Dynamic Range:113dB 
Voltage:1.5-10V DC
Wire:Φ1.5*1.2m 
Outer Size:15mmX15mm 
Weight:About 20g
Color:Black(Color Negotiable) 
Output Connection:3 pin or 4 pin mini XLR connector or 3.5mm connector