Specifications

Class D, PA,Pro audio system, audio amplifier, DSP amp. Digital amplifier with good quality, Perfect protection,

Features of DSP digital amplifier

*2×2 DSP processing module 24BIT 48KHZ sampling rate 32 bit DSP chip processing
*1 factory preset 32 preset modes for user memories
*With USB and RS485 remote control port
*ID can be set separately in the software and hardware, a maximum of 254 machines can be cascaded
*Independent file preservation preset, upload and download function of complete machine data
*Modes of stereo, bridge, parallel connection and crossover are optional
*Built-in signal generator, output of the sine wave and pink noise, white noise signal is used for system testing
*Data can be copied between channels, functional even at off-line state

DSP1200 DSP Function

*10 band EQ Q value is optional from 0.1 to 128, ±12dB adjustable, optional EQ types, BYPASS for each band
*High-pass and low-pass filter: open choices of frequency, slope: -6- -48dB
*Limiter: threshold 0--90dB compression ratio 1:1-1:20 optional
*start-up time: 1ms-200ms release time: 1ms-1s Delay: 0-1360ms
*Noise gate: -90.0dB-0dB start-up time: 1ms-200ms release time: 1ms-1s
*Phase: 0/180°
*With function of bridge and parallel connection

Specifications of digital amplifier DSP1200

Output power 8Ω/1KHz:  2×300W RMS
4Ω/1KHz:2×550W RMS
Bridged power 8Ω/1KHz:700W RMS
Input sensitivity:0dB
Input impedance balance imbalance
Frequency response:20Hz-20KHz@8Ω
THD:0.01%(1KHz,1W
S/N: 110Db (A-Weighted)
Digital processing: 24-bit ∑-Δ AD/DA converter
48KHZ sampling rate
Display:2×20 LCD Display is used for parameters setting and function choice
Power supply: 100-240V ~ 50/60Hz
Net weight: 6.5KG
Dimensions: 480×380×68mm