China factory for Hydraulic Flow Meters testing gauge with Max.flow rate 200L/MIN
USD $1,300 - $2,700 /Set
Min.Order:1 Set
Ji'nan High Land Hydraulic Pump Co., Ltd.
Portable Hydraulic Testing Gauge MYHT-1-2 hydraulic pressure
Application:
MYHT portable hydraulic testing gauge ,which is used for checking and surveying hydraulic system's discharge .Pressure and temperature , is the initiation in china ,and has gotten the country patent .
Warning:
The loading valve should be at turn-on position. Otherwise, danger will arise.
Only the test result is precise with oil temperature kept at 30
°Cor above
Open loading valve before test
Cut off power after completion of test
Maintenance:
Load valve: In correct connection of power, if the load valve could not work, check if there is any jam inside it.
Battery: The battery is able to continuously work over 30 hours and should be charged 4—8 hours for one time.
Flow Meter: It might because of pollutant if the flow meter is not able to show data normally. In this case, contact the manufacturer to solve this problem.
Accessory
1,1.5m rubber hose:2 pieces
2,1.5m testing pressure line:1 piece
3,Tie-in:2 pieces
4,Multipurpose flange:4 pieces
5, Charger:1 piece
Technical Specifications :
model | Max flow (LPM) | Max pressure(bar) | Temperature | Precision | Dimension(mm) | Weight(KGS) |
MYHT-1-2 | 200 | 420 | 150°C | ±1% | 295x265x210 | 6.1 |
MYHT-1-4 | 400 | 420 | 150°C | ±1% | 295x265x210 | 8.8 |
MYHT-1-5 | 500 | 420 | 150°C | ±1% | 295x265x210 | 10.2 |
MYHT-1-7 | 800 | 420 | 150°C | ±1% | 310x285x261 | 14 |