Product Description

Name:

Hdgi hot dip galvanized steel coil and gi sheet
Galvanized Steel Coil/GI sheet/SGCC
Zinc/ hot dip galvanized coils and sheets
Galvanized steel sheet in coil
Decorative galvanized roofing
Gi steel coil /sheet
Galvanized steel coils g450
Hot Dipped Galvanied Steel Coil HDG GI SGCC
SGCC, DX51D Galvanized steel, galvanized sheet
Galvanized steel ribbed sheet
Galvanized steel coils full hard
Galvanized steel coil roofing
Galvanized steel coil strips
Cgcc grade pre painted galvanized steel coil
Galvanized steel manufacturers
HARD/SOFT material, GI Galvanized steel coil
Astm a527 galvanized steel plate
Galvanize steel coil in emirates
Gauge ASTM A653 galvanized steel coils g90
GAGUE 26 steel coil
SS255galvaluzinc coated galvanized steel sheet
Aluzinc coated galvanized steel sheet
Galvanized spangle steel coil
SGCC, DX51D Galvanized steel coil, galvanized sheet
Galvanized steel sheet manufacturers
Galvanized steel strip
Galvanized steel plate/coil SGCC DX51D+Z
Hot dipped galvanized coil for roofing sheet
Az150 steel coils
Galvanized steel sheet
HDGI/GI/SGCC/DX51D+Z/Hot Dipped Galvanized Steel Coils
Galvanized coils, coils and sheet, gi coils, gi sheet
Construction used galvanized steel coils and sheets
Factory sell Galvanized Steel Coil
Spcc cold rolled hot dip galvanized steel coil

Standards: GB/T 2518, JIS G3302, DIN, EN 10142 and ASTM A653
Material grades: SGCC, SGCH, SGCD1, SGCD2, DX51D + Z, DX52D + Z and DX53D + D
Thickness: 0.17 to 4.0mm
Width: 600 to 1250mm
STD width: 914/1000/1200/1219/1250mm
Zinc coating: 50 to 275g/m2
Zinc spangle: Regular or minimum
Surface treatment: Non-chromated and unoiled
Coil inner diameter: 508 or 610mm
Coil weight: 3 to 6T

Used for roofs, outer walls, ovens, explosive-proof-steel, electrically controlled cabinets, and industrial freezers in residential and industrial buildings, household appliances, transportation, base plate and color coating
Packing: Standard seaworthy or customized.

1. Corrugated steel sheet introduction:
Corrugated steel sheet is one of the most corrosion resistant corrugated materials offered in the architectural roofing and siding panel market. Unlike normal galvanizing, this metal material is an actual combination of aluminum and zinc to provide excellent protection.Corrugated steel sheet will give you a great product that lasts longer than the traditional galvanized finish. 

2. Corrugated steel sheet main structure:
Corrugated steel sheet is carbon steel sheet coated with aluminum-zinc alloy by a continuous hot-dip process described in Production Methods. The nominal coating composition is 55% aluminum and 45% zinc. A small but important amount of silicon is included in the coating alloy.


3. Corrugated steel sheet application scope:
Corrugated steel sheet is most commonly used for commercial, agricultural, and industrial purposes, however, it is now also being recognized as an excellent form of residential roofing. Corrugated steel sheet is also known as sinusoidal, corrugated iron or wriggly tin.

4. Corrugated steel sheet main features:
1)Combine the excellent barrier corrosion protection of aluminum with the galvanic protection of zinc.
2)Preferred product for long-term resistance to atmospheric corrosion
3)Superior corrosion resistance.
4)Easy to install, high strength and lower costs
5)Galvanized corrugated sheet is widely used as walls or roofs for factories, warehouses, garages, exhibition centers


5. Corrugated steel sheet installation tips:
1)Prepare the roof surface by removing any old roofing, rotten wood, and adding roofing felt to the entire surface.
2)Calculate the number of sheets of corrugated metal needed. Divide the area of your roof by the size of the sheets you will be using. 
3)Place your first metal sheet in a corner of the roof, flush against the surface.
4)Nail in the first metal sheet to the wood of the roof. 
5)Place the second metal sheet alongside the first with an overlap of 3 to 4 inches (10 cm). 
6)Nail the second metal sheet to the roof.

 

6. Tools you'll need when install corrugated steel sheet:
1)Sheets of corrugated metal 2)Metal ridge caps 3)Roofing felt (if needed) 4)Nails
5)Hex screws 6)Washers 7)Hammer 8)Drill

  1. Tolerance: 
Thickness tolerance +/-1.5%, width tolerance +/-1mm 
2. Application and Usage: 
Building Material, Insulation, construction, Industry material, Decoration material, Shoes &Tents Eyes, Corner Beads, Automotive Industrial, POP Can Bottle and Cap, Deep drawing Case, light industry, TV back board, Traffic Sign, Kitchen utensils, PP caps, Cell mask and so on. 
3. Surfact Quality: 
Be free from Oil Stain, Dent, Inclusion, Scratches, Stain, Oxide Dicoloration, Breaks, Corrosion, Roll Marks, Dirt Streaks and other defect which will interfere with use, 
4. Mechenical Property: 
Chemical Composite and Mechanical Property could meet the requirements of GB/T, ASTM, ENAW, JIS Standard 
5. Value Added Service: 
1)Electroplating 
2)Annealed & pickled. 
3)Rolling, cutting, bending. 
4)Forging, minor fabrication, etc 
6. Packing: 
First, plastic cloth with drying agent inside; Second, Pearl Wool; Third, wooden cases with dry agent, fumigation wooden pallets, aluminum surface could cover blue PVC film. 
Or according to customer's requirments. 

Product Description

Products process:
Un-coiler------stitching machine-----barrels-----tension machine-----uncoil-----alkali washing and degreasing-----cleaning----drying----passivation-----drying---- primary coating----drying----primary coating drying----top coating---top coating----cooling----coil----packing and warehousing.


Product Description
PPGI:
1, Introduction: Color coated steel coils(sheets), i. E. PPGI, also called prepainted steel coils(sheets), are made of galvanized steel coils(sheets) with polymer coatings as surface. It's a new enclosure material and building board with characteristics of light-weighted, heat preserved&insulated, easily installed with bright colors.

2, Production Process: Pretreatment(Degreasing)_Drying_Chromating_Paint Basic Oil_Cooling_Drying_Color Coating_Cooling_Film-covering_Rolling Up

3, Characteristics:
Good at corrosion resistence. Besides zinc coating of the basic plate of galvanized steel sheet, the color coating as the surface has double lifetime to ensure better anticorrosion effect.

With excellent cold bending molded manufacturablity, PPGI products can be processed or directly used as final product. As being light-weighted and conveniently transported, they're widly used to replace wood to save energy.

There're thousands of colors can be chosen as per different application. Any color plays well in decoration.

No pollution with high recycling rate, PPGI coils and sheets are strongly recommended as enviroment-friendly products by the government.

4, Appliance: Thanks to the above characteristics, color coated steel coils and sheets are widly used in construction, furniture industry, transportation industry, ect.

5, eye bands and 4 circumferential bands in steel, galvanized metal fluted rings on inner and outer edges, galvanized.