CE & RoHS Approved! Green 12V/24V Waterproof SMD 5050 LED Strop Light           

12V/24V Flexible LED Strip is used for indoor and outdoor, including kitchen, boat, garden, under cabinet, and bathroom,

as well as for decoration lighting, small-floodlight and cove lighting. 

The Waterproof  Flexible LED strip Light is not only impervious to water, but curves easily and performs well in temperatures ranging

from -30°C to more than 55°C. 

This strip uses a surface-mount high power LED with wide beam angle, seamlessly and evenly bright, so it won't cast annoying shadows.
It heats little , which means you don't have to worry about scald or fire danger. It has a lifespan of over 50,000 hours.

Like all our products, this strip bears a RoHS certificate that strictly ensures that no toxic materials were used in its manufacture.

Features of LED strip light:

1. Available in full range of single-color (red,yellow,green,blue,white),RGB full color;
2. Low power consumption,high intensity and stability;
3. PCB color: Brown, white and black clour optional;
4. Easy connection with snap-in connectors;
5. Every three or six LED lights can form a loop,every three or six LED lights can be cut along any of the above tangent, without damaging other parts.

Application of LED Strip:

1. Architectural lights for canopy,corridor,window,archway
2. Archway, canopy & bridge edge lighting
3. Amusement park, theater & aircraft cabin mood lighting
4. DIY lights for home use
5. Path and contour marking
6. Channel letter lighting
7. Cove lighting

About after-sales:

1.This quotation valid for a month,the price is based on Ex-works(not incl. V.A.T. & Shipping charge),issue V.A.T. invoice should add 10%.

2. Free offer technology support and handle any solution promptly and timely according to every situation.

3. Within two years as warranty once receiving our products. Non-artificial damage can be freely fix and responsible for the shipping charge while our customers normal use of our products.

4. A pay-needed maintenance service within warranty, we will fix:

 1) Damage caused by artificial or nature force majeure;

 2) Damage caused by improper use;

 3) Damage caused by individual remake,decomposition or assembling;

 4) Damage caused by fell,move,scratch,broken or lighting inflow.

AQs: Frequently Asked Questions about SMD5050 12V  LED Strip light

1. Can the LED strips be cut or trimmed?
A: Yes! You can easily cut the LED strips. Use a sharp utility knife. The LEDs are wired in groups of 3, so you should cut between sets of 3 LEDs.

Note: Some of the shorter lengths can't be cut because of a critical power wire inside. Before you cut, just make sure you won't be cutting a power wire, otherwise your LED strip could be damaged.

2. Can the cut section of the strip be re-used?
A: While it is physically possible, it is not a simple procedure and not worth the effort. For practical purposes, you are better off discarding the cut portion.

3. Once cut, is the strip still waterproof?
A: If you cut it right, it will maintain a degree of "weather resistance". But to make a cut strip fully waterproof again, we recommend you add some silicone sealant to the cut end.

4. Do the LED strips require resistors?
A: No. The LED strips do not require any resistors. They are ready to work on any 12 volt power source.