Specifications

Portable Hydraulic Tester
1.Max Flow: 500L/min
2.MaxTemperature: 150 centigrade
3.Max.Pressure: 42MPa

  MYHT-1-4 Hot Selling Pumps and Motors Inspection Kits
1.Dimension:295x265x210mm
2.Max.Pressure:420bar
3.Flow Rate:400l/min

MYHT-1-4 Hot Selling Pumps and Motors Inspection Kits
 

  

Test method:

 

There are many testing methods by using hydraulic pressure tester, the specific application can be conducted according to the specific circumstances. But remember one point: understand the system graph and be sure no jam in the pipeline. During using the tester, the simplest and the most effective test method is: Serial Test

 

 

 

Example 1:  Hydraulic pump ( power components) test:

1)    The tester can be installed between the oil inlet and oil return tank. Make sure the oil wholly pass the tester.

 

2)    Fully open the loading valve, read the maximum flow when pressure is "0".

3)    By loading valve raise the oil pressure.  Record the flow rate from 0 to specified value or maximum value in order to determine the technical condition of the pump.

4)    Now refer the specifications of the hydraulic pump manufactory to check the rated flow ----oil pump efficiency.

 

 

 

 

Technical Specifications :

 

 

model	Max flow (LPM)	Max pressure(bar)	Temperature	Precision	Dimension(mm)	Weight(KGS)
MYHT-1-2	200	420	150°C	±1%	295x265x210	6.1
MYHT-1-4	400	420	150°C	±1%	295x265x210	8.8
MYHT-1-5	500	420	150°C	±1%	295x265x210	10.2
MYHT-1-7	800	420	150°C	±1%	310x285x261	14