ITC FP Series 500W 4 Mic Input and 4 Line Input BGM PA Mixer Amp
USD $120 - $400 /Unit
Min.Order:10 Units
Guangzhou ITC Electronic Technology Limited
ITC TI-120S Series 500W 5 Mic Input and 2 Line Input PA System 5 Zone Mixer Amplifier
ITC T-8S02 8 Switchable Mic/Line Input 2 Output Microphone Preamp
ITC TI-120S Series Having Priority Function and EMC Input Public Address Audio Zoning Amplifier
ITC T-30C Series Economical 30W 60W Support 2 Line and 2 Mic Input PA System Integrated Amplifier
ITC AP Series 60W 120W 240W 2 Mic Input and 1 Line Input Mixer PA Amplifier 100 V
ITC TI-60 Series Cost Effective PA System 5 Zone Mixer Amplifier
ITC FP Series Having Priority Function Audio Public Address Amplifier
ITC FP Series Having Priority Function Audio Public Address Amplifier
ITC FP Series Having Priority Function Audio Public Address Amplifier
ITC FP Series Having Priority Function Audio Public Address Amplifier
This series is mixer public address amplifier. The rated power is 60W, 120W and 240W so that it could meet the demand of small to medium scale public address system. The priority of Mic 1/2/3/4 input is higher than other audio input. It’s with 2 kinds of speaker output: 1 constant voltage output at 50V, 70V or 100V; 2 constant impedance output at 4 to 16 ohm. Therefore, it could work with constant voltage speaker and constant impedance speaker. What’s more, each input has independent volume control, and total volume control is available. At the mean time, input signal indicator of 6 level is available. Last but not the least, it’s with complete protection function, including over-heat, over-load, short, etc. And it’s with excellent fan to ensure high efficient cooling and quiet working state.
ITC FP Series Having Priority Function Audio Public Address Amplifier
1) Rated Power: 60W, 120W, 240W, 350W and 500W;
2) Power supply of both AC 110V/230V and DC 24V are available;
3) Each input has independent volume control and treble/bass control; total volume control is available;
4) With 4 AUX input and locking button is provided to avoid mixing;
5) 4 Mic input is in type of balanced XLR; priority switcher and phantom power are provided;
6) With electronic level indicator for output;
7) With XLR balanced Line output for external power amplifier; with REC output for recorder; with Pre-Output and Amp-Output for external audio signal processor;
8) With 2 kinds of speaker output: 1 constant voltage output at 70V or 100V; 2 constant impedance output at 4 to 16 ohm;
9) Built-in chime of 2 or 4 tone;
10) With complete protection function, including over-heat, short, over-load, peak clipping, etc.
ITC FP Series Having Priority Function Audio Public Address Amplifier
1) DC 24V;
2) The handle could be removed, according to the demand of clients;
3) Detection module which could output short signal to activate backup amplifier.
ITC FP Series Having Priority Function Audio Public Address Amplifier
Model (2U) | T-60FP | T-120FP | T-240FP |
4 Mic Input | ±2.5 to 100mV/2Kohm XLR Balanced with Phantom Power | ||
Phantom Power | +48V | ||
4 AUX Input | |||
Sensitivity/Impedance of Tuner & Tape | 350mV/47Kohm | ||
Sensitivity/Impedance of CD & Line Input | 350mV/47Kohm | ||
S/N Ratio | >75dB | ||
Frequency Response | 70Hz to 16KHz (+1, -3dB) | ||
Control | |||
Bass | ±10dB | ||
Treble | ±10dB | ||
Chime | 2 or 4 Tone | ||
Output | |||
Electro/Impedance of Output | 1000mV/470ohm | ||
REC/Impedance of Output | 200mV/470ohm | ||
Distortion | <0.1% | ||
Operating Condition | |||
AC Power | AC 220 to 240V 50/60Hz | ||
Dimension(DxWxH mm) | 353*484*88 | ||
Power Consumption | 100W | 200W | 400W |
Weight | 8.1Kg | 9.4Kg | 13.2Kg |
ITC FP Series Having Priority Function Audio Public Address Amplifier
Model (3U) | T-350FP | T-500FP |
4 Mic Input | ±2.5 to 100mV/2Kohm XLR Balanced with Phantom Power | |
Phantom Power | +48V | |
4 AUX Input | ||
Sensitivity/Impedance of Tuner & Tape | 350mV/47Kohm | |
Sensitivity/Impedance of CD & Line Input | 350mV/47Kohm | |
S/N Ratio | >75dB | |
Frequency Response | 70Hz to 16KHz (+1, -3dB) | |
Control | ||
Bass | ±10dB | |
Treble | ±10dB | |
Chime | 2 or 4 Tone | |
Output | ||
Electro/Impedance of Output | 1000mV/470ohm | |
REC/Impedance of Output | 200mV/470ohm | |
Distortion | <0.1% | |
Operating Condition | ||
AC Power | AC 220 to 240V 50/60Hz | |
Dimension(DxWxH mm) | 424*484*132 | |
Power Consumption | 500W | 700W |
Weight | 15.4Kg | 17.3Kg |