High-technical hydraulic deadweight tester

Portable  Hydraulic Tester

MYHT-1-2

200l/min, 150 °C  420 bar

MYHT-1-4

400l/min, 150 °C  420 bar

 MYHT-1-5

500l/min, 150 °C  420 bar

MYHT-1-7

700-800l/min, 150 °C  420 bar

Integration design for testing hydraulic pump, motor, valve or transmission

Easy to and instant use

Ideal for testing hydraulic system and prevent from breakdown arising. 

Shift Switch for reading flow and temperature

Built-in loading valve

Accurate measurement

One-way load

Light weight, portable, convenient

Chargeable Lithium Battery (12V) with big capacity and long useful life

Warning:  

The loading valve should be at turn-on position. Otherwise, danger will arise.

Only the test result is precise with oil temperature kept at 30°Cor above

Open loading valve before test Cut off power after completion of test

Maintenance

Load valve: In correct connection of power, if the load valve could not work, check if there is any jam inside it.

Battery: The battery is able to continuously work over 30 hours and should be charged 4—8 hours for one time.

Flow Meter: It might because of pollutant if the flow meter is not able to show data normally. In this case, contact the

manufacturer to solve this problem.