Specifications

1.DK7745 edm wire cut machine
2.high precision for metal
3.manufacture,dealer,factory,wholesaler
c wire cutting

DK7745 edm wire cut machine

 

 

 

 

Features:

 

-This machine applies Non-touch point induction type direction switch.The wire running speed can be adjusted through frequency conversion.

-The machine is suitable for processing mold and the components high in precision.

 

Parameters/type	DK7745
worktable travel(mm)	450×550
max. workpiece cutting thickness(mm)	400
worktable displacement(mm)	4
machining precision(cutting octagon)(mm)	0.015
max. cutting speed(mm²/min)	100
max. cutting taper(optional)	6°-30°
worktable's max. load(kg)	450
wire electrode diameter(mm)	Φ0.12-Φ0.18
wire storage cylinder dimensions(mm)	150×200
max. wire length(mm)	320
equivalent pulse(mm)	0.001
stepped motor	90BF006
wire storage cylinder motor	AC:YS7124  370w 1400rpm  DC:110SYT  185w 1500rpm

operation liquid pump	AB25       90W     25L/min
outline dimensions(mm)	1800×1500×1500
machine weight(kg)	1600
total power	2kW      AC380V/220V    50Hz

  

Machine tool structural summary:

The machine tool is composed of the machine tool bed, coordinate worktable, wire drive device, wire support, operation liquid system, electric parts and accessories.

The wire electrode used for machining is wound on the wire storage cylinder evenly and its high-speed to-and-fro movement is driven through the guide wheel on the wire support.

The work piece is installed on the clamp of the worktable and is fixed with the press head screws.

The worktable drives the work piece to move in the programmed track.

There is sparkle discharge between the work piece and the wire electrode so as to create high heat to melt the corroded metal and to realize cutting purposes.

  

  Operation liquid system:

It is used to provide the operation medium, that is, the operation liquid with certain insulation function.

At the same time, it can cool down the work piece and the wire electrode.

The water pump pumps the operation liquid for wire cutting to the machining area.

This is in favor of the sparkle discharge and the scrap discharge.

The operation liquid flows back to the operation liquid box through the water pipe and it is recycled after filtration.

The residue settles in the waste box.

The operation liquid box shall be cleared up regularly and the operation liquid shall be replaced timely.

Use the tapped water or diluted water to prepare the operation liquid according to the mixture ratio.

 

 

 

 

We sincerely hope to establish a long-term cooperative relationship with you and become your true partner when you need our service.