hydraulic piston pump test bench YST380    

Advantage:

YST Series Hydraulic testing table are used for checking and proofreading the products that include hydraulic pump,motor and valve,it also can conduct hydraulic system's breakdown diagnosis,these products are researched and produced by ourselves,so we could combine conduct according to customers'needs.

Technical Parameters:

Flow Rate:380L/min
Pressure:35MPa
Power:120KW
Motive Force: Combined electric motor hydraulic drive,drive,stepless speed regulation.

For checking open pump First: Preparation phase :

 1 Turn on the main power switch and vice power switch.

 2 Turn on the computer, run the test program until the computer running smoothly <SIMATIC> select open pump test interface.

 3 Turn on the instrument power switch, observe each instrument is normal (plus or minus 0.5 is normal, temperature except) on the operation panel knob to the left to zero the instrument display.

 4.The hand automatic rotary switch to manual.

 5. Pump inlet, oil outlet drain ports connected respectively with 0, 5, 3, and confirm that connections are secure and open valve 0 6.

 6 the final confirmation of the connection tube ball valve open) open (with piping level behavior, not connected to the shut down.

 7 according to the spin of the pump to the corresponding select the main motor left or right-handed.