Features of high effect saving energy animal feed premix plant

1. The fodder/feed premix plant is widely used for concentrate feed mill, additives plant, pre-mix feed mill to meet requirements for

    higher output, top quality and retrofit;

2. The fodder/feed premix plant technological layout is reasonable; stable running; steel structure; less floor space is needed;

3. The fodder/feed premix plant made of stainless steel is adopted; all parameters are higher than current industry standard;

4. Dedusting machines are used for dumping hopper, hand intake, bagging off so that minimizes dust to meet environmental requirements;

5. High homogeneity (CV≤5% and can reach 2%),low residue;

6. The fodder/feed premix plant can produce both concentrate feed and premix feed;

7. Professional design, manufacture and installation guarantee clients get optimal profit.

Work principle

    Double shaft paddle mixer is make full use of the mixed convection principle,it is using up movement of materials inside the mixer

flow layer formation, produce instant weightlessness, to the best state of mixed effect.

Applicable scope

    Sawdust, rice husk, cotton stalk, cottonseed skins, weeds, crop stalks etc.

      Henan Censun Machinery Equipment Co., Ltd.(short for Censun hereafter) is located in a historical and cultural city-Zhengzhou, which is a machinery industrial center. Censun company is an ISO 9001:2008 certified company engaged in the R&D, production, sale and service of feed mechanical engineering, palletizing robot, warehousing engineering, transportation and puffing, complex fertilizer engineering, automatic control technology etc. Censun can provide you with a variety of independent operating from the high quality single machine to the full set of feed automated production lines, leading you to get the maximum return from your investment.

      Using science and technology as guide, Censun constantly develop new feed processing machines, improve product quality and perfect after sales service. Censun pay great attention to international technical communication and cooperation, adopts advanced technology from the USA, Germany, Switzerland and other countries, and established advanced production lines. Censun are adhering to the rich experience of practical application, continuous innovation, with a high degree of responsibility for the customer to treat every project and every detail, the construction of each project to perfect, every detail is considered thoughtful. In common development with customers, and customers continue to share the joy of success, so that customers are deeply felt the positive application of Censun for its excellent quality and fast service satisfaction.

      "Innovation, Meeting and Exceeding Customers' Requirements" is Censun’s quality principle. To be one of the top feed machinery suppliers is Censun’s goal. Censun are deeply committed to providing customers with the most competitive products and technical information.

    Censun’s success is measured by the success of customers. Welcome friends worldwide to visit Censun at any time!

Service before sale 

1, 24 hours online .Your inquiry will be quickly replied by email. Including the specification, function, capacity, volumes,

    service charges and so on. Also can go through all questions with you by any online chatting tools (Wechat, Whatsapp,

    Skype, Viber, QQ, TradeManager etc) .

2, Showing the pictures and videos when the machine is working. 

Service on sale

1, Test every machine and inspect the machine seriously . 

2, Sending the machine’s pictures to you, then packing it with standard export wooden box after you confirm the machine is ok .

3, Delivery: If they will be shipped by sea .after delivery to seaport .Will tell you the shipping time and arrival time. Finally, 

    send all original documents to you by Express For Free. If they will be deliveried it by Express to your door(DHL, TNT,

    Fedex, etc) or by air to your airport, Or logistic to the warehouse which you request . We will tell you the tracking number 

   after delivery.

4, We can dispatch technician to your factory and help you to installing them, until they can work successfully.

Service after sale 

1,  Offering original parts of machine.

2, 24 hours online to solve any problem. Supply you English manual book and technical supports , maintain and install 

     video to help you solve the problem, or dispatch worker to your factory.

About the machine:

Q1. Does this machine can make wood pellets?

Answer: This machine can not make wood pellets. It is only can be used to make feed pellets for poultry. If you want to make wood pellets, you need bigger models.

Q2. What are the spare parts for this small pellet machine?

Answer: The spare parts for this machine are one die and two rollers.

Q3. How often should I change the spare parts?

Answer: The longlife time of the die and rollers is 1500 hours at least. It needs to change the easy weared parts every five months. If maintained and used well, the parts can be used about EIGHT months or more.

Q4. How often would the machine need to be serviced?

Answer: Every three months is the best for the machine.

Q5. Do the raw materials require any additives to aid in the forming of the pellets?

Answers: It doesn't need to add any additives to aid in the forming of pellets. The only thing you need to do is to control the moisture of the raw materials properly.

Q6. What's the warrantee time?

Answer: One year for main machine, except the spare parts.

Problem investigation and trouble shoot:

Q1. I want to make feed pellet for chicken, what's the proper diameter of the pellets?

Answer: Diameter of pellets and applications(for your reference):

Q2: The machine works well, but it can not make pellets, it is hard to form pellets. What can I do?

Answer: If the moisture is too high or too low, it is hard to form pellets. It would be better if the moisture is between 13-25%, and the moisture depends on the raw materials. Different raw materials, different moisture.

 Q3. The capacity becomes smaller after a period of time use, why?

Answer: Probably because the gap between die and rollers is too big. Please decrease the gap between die and rollers. Or it is because the moisture of raw materials is too low. Add some water to increase water content.

Q4. The machine stops suddenly during working.

Answer: There must be a big, hard foreign object or metal enter the machine, please cut off the power and get the object or metal out of machine.

CONTACT ME FREELY

Skype: bellwinner

MP: 0086 18739438910

QQ: 1670601774