Specifications

HY-PT-1 test Bench
No power source
Stable rail pressures
Secondary filter

HY-PT-1 Pump Test Bench

 

Main function:

1. Testing gear pump pressure and vacuum experiment of PT Pump
2. Testing idle speed of PT Pump
3. Testing weight assisted pressure
4. Testing pressure and discharge in every checking point of PT Pump
5. Testing AFC of PT Pump
6. Testing stoping oil of PT Pump
7. Testing the throttle of PT Pump
8. Testing throttle return of PT Pump
9. Testing ASA valve of PT Pump

Configuration:

1. Power:no power source
2. speed range: stepless frequency conversion:0-4000 circle/min or at will
3. test pressure of fuel:≤2.5MPa
4. test pressure of air:≤0.25MPa
5. test pressure of gear pump:≤5MPa
6.  fuel can be cooled by air and heated by heater. The temperature can be displayed in the screen and controlled automatically.

7. Main technique parameter

   1. Number of test pump 1 set

   2. Oil tank capacity 50 L

   3. Oil type 0 diesel oil

   4. Temperature of oil 35±2

   5. Oil test pressure ≤400 PSI

   6. Air test pressure ≤250 PSI

   7. Gear pump test pressure ≤600 PSI

   8. Oil test demarcated flow 75-720, 710-2400 PPH

   9. Oil test leak flow 10-760 ml./min

   10. Air test flow 0-150 ml./min

   11. Dimension of stand 710×900×1880 (L×W×H) mm

   12. Weight of Stand 600 Kg