New design RO system built in 3.5L tank hot water and warm water
USD $94 - $98 /Set
Min.Order:100 Sets
Shenzhen Feilite Water Purification Equipment Co., Ltd.
Specification
Warm water out of water: 1.4L / min
Hot water out of water: 1.2L / min
Heating capacity: 4L / h (≥90 ℃)
Power: 220V / 50Hz (570W)
Class protection against electric shock: Class I
Water pressure: 0.1-0.4 Mpa
Filter: PP cotton + activated carbon + RO membrane + post carbon
Product size: 445 * 245 * 460 mm
Package Size: 525 * 300 * 560 mm
Net Weight: 9.5 KG
Product Weight: 18 KG
Packaging: single packaging
Yellow thick layer 7 packet (# 91 outside the yellow box (400G), 91 # foam)
Using Tips:
1. The product should be turned off promptly if there is leaking water;
2. To ensure purifying efficiency, We recommend user to replace the filter according to replacement cycle;
3. When the water suddenly becomes considerably larger flow, Please do not drink the water;
4. Ask professional person to repair or alter the product ;
5. When moving the product, please do not pull the PE pipe in case of leakage;
6. When the product is not used for a long time, turn off the water supply and power supply;
7. Do not use the rated voltage power that is disproportionate;
8. After first time use it or a short time (within 1 month), when start to use it, first two tanks of produced water should be drained; after long-term (over 1 month) stopped use it, when start to use again, should replacement activated carbon filter;
9. Use detergent to scrub it, please do not to use gasoline, alcohol and other solvents to scrub it.
Installation Note:
1. Do not install under sunlight or nearby flammable objects;
2. The product working temperature 5 to 45 degrees;
3. The product can not filter hot water, please do not connect it to water heater.
4. Before use it, installation of the product should be well fixed to prevent product to turn down;
5. If the tap water pressure is higher than 0.4 Mpa, please install the pressure limiting valve before the product;
6. Do not arbitrarily remove the parts on the product, to prevent leakage and damage to the machine;
7. PE pipe and fittings should installed in place;
8. Water tee, no seals should be wrapped with raw materials, there is a ring of raw materials can not be wrapped around the band;
9. After the installation is completed, you should turn on the water and goose neck faucet, after 5 minutes, close goose neck faucet , and check there leaks;
10. Pure water end and waste water end can not be inversely connected.
Our company is located in Shenzhen, Guangdong province in China.
We have been in the field of home water purification for many years, and mainly manufacture Ultra Filtration water filters made of food grade PAN, stainless steel UF water purifiers and RO pure water purifiers.
Besides, we offer OEM service for customers.