Specifications
1.Debugging the test point and interval angle of oil supply of injection pump2.Checking the tightness of injection pump
HY-WKD PumpTesting Equipment
Digital parameters:
Power 11KW/15KW
Speed Range stepless frequency conversion, multi-gear speed overhead, speed :50-400 rpm or at will
Number of station can be debugged 12
Fuel supply 0-0.4MPa(low pressure) 0-4MPa(high pressure)
Overall dimension length:2100mm width:700mm height:1470mm
Net weight 1000kg
Rotation speed range of main shaft 0~4000
Rotation direction of main shaft Positive, negative
Testable cylinders of pump 12
Maximum output power 5.5/7.5/11/15/18.5
Height from center line of main shaft to work table(mm) 125
Oil supply pressure of fuel system(MPa) Low pressure≥0.4
High pressure≥4.0
Supply capacity of fuel system(l/m) ≥8
Oil measuring frequency 0~1000
Control temperature of fuel oil(°C) 40±2
D.C. power source 12/24V
Power of motor 7.5/11/15kw
Pressure of air way(Mpa) -0.1~1
Overall dimension 1820mm×850mm×1800mm
Weight of test stand 750kg
Functions:
1.Debugging the uniformity and quantity of the oil supply of each cylinder in injection pump.
2. Debugging the test point and interval angle of oil supply of injection pump.
3.Debugging the performance of different speed governor.
4. Checking the tightness of injection pump Testing the quantity of oil return of distribution (dispensing)pump .
5.Checking pressure compensator of distribution (dispensing)pump .
6.Measuring the pressure of pump chamber .
7.Measuring the advance angel Measuring the travel of gear lever.