Specifications

1.Debugging the test point and interval angle of oil supply of injection pump
2.Checking the tightness of injection pump

HY-WKD  PumpTesting Equipment

Digital  parameters:

 

Power 11KW/15KW

Speed Range stepless frequency conversion, multi-gear speed overhead, speed :50-400 rpm or at will

Number of station can be debugged 12

Fuel supply 0-0.4MPa(low pressure) 0-4MPa(high pressure)

Overall dimension length:2100mm width:700mm height:1470mm

Net weight 1000kg

 

 Rotation speed range of main shaft 0~4000

Rotation direction of main shaft  Positive, negative

Testable cylinders of pump 12

Maximum output power 5.5/7.5/11/15/18.5

Height from center line of main shaft to work table(mm) 125

Oil supply pressure of fuel system(MPa)   Low pressure≥0.4

  High pressure≥4.0

Supply capacity of fuel system(l/m) ≥8

Oil measuring frequency 0~1000

Control temperature of fuel oil(°C) 40±2

D.C. power source 12/24V

Power of motor 7.5/11/15kw

Pressure of air way(Mpa) -0.1~1

Overall dimension 1820mm×850mm×1800mm

Weight of test stand 750kg

 

 Functions:

1.Debugging the uniformity and quantity of the oil supply of each cylinder in injection pump.

2. Debugging the test point and interval angle of oil supply of injection pump.

 3.Debugging the performance of different speed governor.

4. Checking the tightness of injection pump Testing the quantity of oil return of distribution (dispensing)pump .

5.Checking pressure compensator of distribution (dispensing)pump .

6.Measuring the pressure of pump chamber .

7.Measuring the advance angel Measuring the travel of gear lever.