Specifications

12cylinders
two-side operation
12Pcs of standard injector
stable work station

HY-WK Fuel Injection Pump Testing Equipment

 

Voltage:380V,3phase

Power:electronic

CE certificate

 

Main function:

1. Debugging the uniformity and quantity of the oil supply of each cylinder in injector pump

2.Debugging the test point and interval angle of oil supply of injector pump

3.Debugging the performance of different speed governor

4.Checking the tightness of injector pump

5.Testing the quantity of oil return of distribution pump

6.Checking pressure compensator of distribution pump

7.Measuring the pressure of pump chamber

8.Checking of the mechanical governor.
9.Checking of the pneumatic governor.
10.Checking of the vacuum capacity of governor.
11.Measurement of the internal pressure of distributor pump body.
12.Measurement of the reflux delivery of distributor pump.

 

 

Two control system. Computer and instruments. You can select one of them when you operate the test bench.
With protect functions for over and low voltage and short phase. Save electric power. High output torque, low fall of rotation speed. Adjusting speed quickly.
It can test both distributor ( VE ) and in-line pumps.
Heavy duty type, with two rear electrical cabinets
A/C direct driving system (no belts or gears). 100% power output without loss.

 

 Parameter>>>:

 

Rotation speed range of main shaft	0~4000
Rotation direction of main shaft	Positive, negative
Testable cylinders of pump	12
Maximum output power	5.5/7.5/11/15/18.5
Height from center line of main shaft to work table(mm)	125
Oil supply pressure of fuel system(MPa)	Low pressure≥0.4   High pressure≥4.0
Supply capacity of fuel system(l/m)	≥8
Oil measuring frequency	0~1000
Control temperature of fuel oil(°C)	40±2
D.C. power source	12/24V
Power of motor	7.5/11/15kw