Specifications

displayed on the mechanical gauge
Pump tester
Cast iron operation platform
Stable rail pressures
Secondary filter

HY-WKD Diesel Fuel Injection Pump Tester(same as EPS711)

 

Function:

1. Debugging the uniformity and quantity of the oil supply of each cylinder in injector pump

2.Debugging the test point and interval angle of oil supply of injector pump

3.Debugging the performance of different speed governor

4.Checking the tightness of injector pump

5.Testing the quantity of oil return of distribution pump

6.Checking pressure compensator of distribution pump

7.Measuring the pressure of pump chamber

8.Measuring the advance angel

9.Measuring the travel of gear lever

 

Advantage:

1.The fuel temperature and air pressure aer displayed with 3-digit

2.Manual changing rotate speed and rotate speed are ten-archive presetting.

3.0 to 0.25 MPa air source output , air pump is built-in.

4.12V/24V power supply

5.Main motor has the structure of cubic steel frame and the whole structure is compact and stable.

6.The motor shell is spraied with static , which is beatiful.

7.Gathering oil tank cold rotate towards the left or towards the right,it can also be adjusted up to down.

 8.Having emergency stop button .

9.Having the protection functions of over voltage .low voltage over heat and over load etc.

 

Power	11KW/15KW
Speed Range	stepless frequency conversion, multi-gear speed overhead, speed :50-400 circle/min or at will
Number of station can be debugged	12
Fuel supply	0-0.4MPa(low pressure) 0-4MPa(high pressure)
Overall dimension	length:2100mm width:700mm height:1470mm
Net weight	1000kg