Specifications

Pump test bench
Cast iron operation platform
Stable rail pressures
Secondary filter
45ml measuring cylinder

HY-WKD Diesel Fuel Injection Pump Test Bench(same as EPS711)

 

Main function
1. Measurement of each cylinder delivery at any speed
2. Test point and interval angle of oil supply of injection pump.
3. Checking and adjust the mechanical governor.
4. Checking and adjusting the distributor pump.
5.Experiment and adjusting of behavior of supercharging and compensatory
6. Measurement of oil return of distributing pump
7. Testing of the electromagnetic valve of distributor pump.(12V/24V)
8. Measurement of the internal pressure of distributor pump.
9. Checking of the advance angle of advance device.(on request)
10. Checking the sealing of injection pump body
11. Install auto-sucking oil tube to check oil supply pump(including VE pump.)

 

 

Advantage:

1.The fuel temperature and air pressure aer displayed with 3-digit

2.Manual changing rotate speed and rotate speed are ten-archive presetting.

3.0 to 0.25 MPa air source output , air pump is built-in.

4.12V/24V power supply

5.Main motor has the structure of cubic steel frame and the whole structure is compact and stable.

6.The motor shell is spraied with static , which is beatiful.

7.Gathering oil tank cold rotate towards the left or towards the right,it can also be adjusted up to down.

 8.Having emergency stop button .

9.Having the protection functions of over voltage .low voltage over heat and over load etc.

 

Power	11KW/15KW
Speed Range	stepless frequency conversion, multi-gear speed overhead, speed :50-400 circle/min or at will
Number of station can be debugged	12
Fuel supply	0-0.4MPa(low pressure) 0-4MPa(high pressure)
Overall dimension	length:2100mm width:700mm height:1470mm
Net weight	1000kg