Specifications

1.high quality
2.best service
3.less impurities
4.effective shipment
5.si&ca can be controlled as need

Anyang manufacturer pure Ca cored wire

for steelmaking

 

 

cored wire info 

 

 

Cored wire is widely used on ladle refining process. Crushing the additives (de-oxidant, desulfurizer, alloys) into certain granulation (in the form of powder), then, using the equipment to fill the powder into “U” shaped sheath, which is made of high quality cold rolled steel strip, lastly, tightly closing the wire, so a multiple material (cored wire) with certain length will be obtained.

 

 

 

1. Aids in optimum achievement of metallurgical and mechanical properties of finished steel.

 

2. Precise addition of reactive toxic and other additives into the metal.

 

3. Low carbon steel sheath used for tightly encasing. The powdered additive elements.

 

4. The shape of wire is obtained by deformation without elongation, thus permitting.

 

 

advantages

 

Being propitious to adjust and control the active metal and the content of microelement.

Keep stable of the alloy performance function, reducing steelmaking cost.

Changing the inclusion form to improve the mechanical property.

Facilitate the operation and reduce the operation cost.

 

Model	Chemical Composition(%)	Wire Diameter (mm)	Wire Thickness(mm)	Wire Weight (g/m)	Powder  Weight (g/m)	Uniformity (%)
SiCa	Si55Ca28	13.0	0.4	170	230	2.5-5
CaFe	Si55Ca15Ba15	13.0	0.4	170	215	2.5-5
SiCaBa	Si55Ca15Ba15	13.0	0.4	170	220	2.5-5
Ca	Ca 28-53	13.0	0.4	170	240	2.5-5
SiCaBaAl	Si30-50Ca9-14 Ba9-18Al8-16	13.0	0.4	170	225	2.5-5
TiFe	Ti30	13.0	0.4	170	510	2.5-5
CaFe	Ca25-30	13.0	0.4	170	240	2.5-5
ReSiMg	Mg5-10Re1-5 Ba1-3Ca2-4Si30-50	13.0	0.4	170	230	2.5-5
C	90min		95min		98min

 

 

Except our above regular products,we can also produce other models according to your specific requirement. Please conatct us to get your customized product.