Hot Sale tattoo removal portable yag laser
USD $500 - $3,000 /Set
Min.Order:1 Set
Yiwu Lasy Science & Technology Co., Ltd.
800W power and 1600mj energy laser tattoo removal machine, Yinhe-V18.
Applications of laser tattoo removal machine:
1) Removal of eyebrow line, eye line, lip line...etc
2) Removal of tattoo(red, blue, black...etc)
3) Clearance speckle, black naevus, fleck, age spots...etc
4) Removal of vascular lesion and spider vessel...etc
5) Hair removal and Skin rejuvenation
Technical Parameters of laser tattoo removal machine Yinhe-V18:
Laser type | Sapphire Switch-Q / KTP / YAG Laser |
Wave length | wavelength 1064nm & 532nm & Skin 755nm |
Screen | 8.4" color-touch Screen |
Joint part | Adopts the most advanced(Plug and play) joint part |
Width of pulse | 12ns |
Facular diameter | 1-8mm |
Pulse energy | 0-1600mj |
Pulse rate Frequency | 1-6Hz |
Net weight | 18kg |
Gross weight | 31Kg |
Dimension | 54cm*28cm*34cm |
Voltage | 220V / 110V / 12A 50Hz(60Hz) |
Cooling system | Wind + water + semiconductor cooling |
Details of laser tattoo removal machine Yinhe-V18:
Two colors' handle of laser tattoo removal machine V18:
Inside of laser tattoo removal machine V18:
3 treatment probes of Yinhe-V18:
Pictures of the Working Screen:
FAQ about Laser tattoo removal machine:
1. Why does the ink stay in the skin when you have a tattoo?
When you have a tattoo the particles of ink are too large for the body to destroy, so instead, it encapsulates the particles of ink with a network of collagen fibres as the skin heals, and there the tattoo remains.
2. How does the laser work to remove it?
The laser emits a pulse of light that is preferentially absorbed into certain colours of ink. The light enters the skin at a speed that is too fast to heat the skin (billionths of a second), instead, it produces a shock wave effect and breaks up the ink particles into smaller pieces, the body then recognises these particles as something that shouldn t be there and attacks them, removing them naturally via the body s own natural elimination system.
3. Can you treat all colours?
No. Light is measured in nanometres and there are two wavelengths of light that are emitted from this laser C one is invisible infrared light (1064nm) and the other is visible green light (532nm). The infrared wavelength is preferably absorbed into black and dark blue inks, whereas the green light is absorbed by red ink. It is possible to treat some other colours although white, yellow and bright colours are difficult. This is not usually a problem however, as lighter colours cover very easily. If you wish to cover-up an existing tattoo then the
darker colours will be faded or removed, allowing you greater choice of size and colour of the cover- up design you choose.
4. Will the tattoo be removed in one treatment?
No, that us very unlikely. The light can only shatter a certain amount ink in one treatment, so several treatments are needed at 4-6 weekly intervals to work through the layers. You will notice the tattoo fades
more and more with every treatment you have. A test patch will be performed before a full session goes ahead to check how you react to the treatment. A professional tattoo can take between 4 C 5 treatments
and sometimes only take 1 or 2. There are several factors that influence the number of treatments required, these can be down to how easily you heal, how deep the ink is in the skin, and the types of ink that were used. Generally speaking the longer you have had the tattoo and the darker it is, the easier it is to remove.
5. What happens to my skin after treatment?
The immediate after effect of the treatment is that the skin turns temporarily white, this is due to water evaporation and disappears with an hour or two. The skin also swells and feels like mild sunburn, this
usually disappears within 24-48 hours. It may blister too. The body continues to remove ink after the treatment and the skin is usually back to normal within a few days.
6. Are there any side affects?
Sometimes if you use too high energy, bleeding and/or blistering can occur. Especially for lady's skin, very weak. So you just need to use the energy that can make the tattoos become white, begin from our original energy.
7. Will the laser treatment scarmy skin?
No. If bleeding or blistering does occur it is very important not to pick any scabs that may result when the skin is healing C this could cause scarring, and should be avoided as scar tissue can make further treatments more difficult.
Brief introduction of Lasylaser company:
1. Our company develops in surprisingly speed.
2. We have reliable credit and good reputation.
3. Great company scale
4. The most advanced product line
5. Excellent quality, best price
6. We have all the certificates required
7. Frequently, attend international exhibition.
8. We have a grand show hall and welcome to visit.
Shipping way: DHL, UPS, FedEx, EMS which according to customer's request.
Delivery time: Generally the product can be shipped within 3 days after confirmation,
there is need about 4 to 7 days for shipping
Warranty service
One year warranty, lifetime maintenance
1. Within one month, if the machine have big fails, will send you a now one.
2. Within one year, for any quality problem, we will send the spare parts for free, or if you send back the machine for repair, we will provide repair service for free.
3. Life time maintenance, there is professional engineer provice technical and treatment solution all time
Basic service
1. Train operation by Video
2. Detailed information showed on user manual
3. All time on-line service provice any technical and treatment problem.
OEM&ODM service:
We can do the OEM and ODM service for you to the machines on the followings:
1. Intense pulsed light technology
2. E-light ( IPL+RF) technology
3. Q-switch ND: YAG laser technology
4. Thermage rf technology
5. 808nm diode laser
6. Co2 Fractional laser technology
7. SHR ( super hair removal)
Special service :
1. Software adjustment (logo &menu design, different languages)
2. Unique machine shape design
3. Treatment handle, filters design.
4. Package (style, material, label design)
5. According to the budget, machine weight, size, provides reasonable projects
We are looking forward to hearing from you!