GRAND-ACCESS CE Approved 304 Stainless Steel Pole Swing Turnstiles
Negotiable /Set
Min.Order:1 Set
Shenzhen Grand-Access Security Co., Ltd.
CE Approved Flap Barrier Turnstile Gate ,fingerprint turnstile
CE Approved 304 Stainless Steel Swing Turnstile,Electronic security entrance turnstile sliding gate
CE Approved Flap Barrier Turnstile Gate with IR Sensor,alarm,passage turnstiles gates
CE Approved Security Passage Turnstile Gate with IR Sensor,alarm
GRAND-ACCESS CE Approved 304 Stainless Steel Pole Swing Turnstiles
Introduction of swing turnstiles
Single pole barrier gate is a high-tech product which mainly provides intelligent management to passageway, and is the upgrade product of intelligent tripod turnstile and swing barrier. Like swing barrier, this product is finely processed with complete functions and high level, suitable for high-level neighborhoods, intelligent buildings, hotel, subway, port and club those high-level places.
This equipment is subtly integrated with machine, electronics, micro-processor control and ID identification, provides convenience for the use of card reader identification equipments, such as IC card, ID card, bar code and fingerprint. It can carry out intelligent control and management to the passageway through choosing various identification equipments and adopting fair, reliable security protection, alarming equipment and direction indicating equipments...
Classified into two kinds: single motor (suitable for single passageway and multiple passageway.)Double motors (suitable for multiple passageways)
Technical of swing turnstiles
1.Dimension: length 1200, height: 1000 MM
2.Length of stick: 300MM, optional range: 250-500MM
3.Weight: 90KG
4.Material of case: domestic standard SUS (304#)
5.Power supply voltage: AC220±10% V,50HZ
6.Drive Motor: DC brushed motors (24V)
7.Input interface: electricity relay switch signal or 12V level signal, or 12V pulse signal with
8.whose pulse width 100ms, drive electricity 10mA
9.Normal service life: 3 million times
10.Communication interface: RS485
11.LED indicating lights: Two
12.Card-reading windows: Two
13.Inspection and repairing ports: five
14.Transit speed: 30-40 people/ minutes
15.Closing and opening time of stick: 1 second
16.When electricity turns on, 3 seconds needed for it to enter into passing status.
17.When there is breakdown, 10 seconds needed for its automatic return/reset.
18.Working environment: indoor, outdoor (shelter)
19.Temperature: -40°C—— +50°C
20.Relative humility: ≤90%, no-condensation
21.Two-way reading card window/direction indicator/anti clip function without electricity automatically open/take infrared
Function of swing turnstiles
1) functions of breakdown self-checking and alarm warning, very convenient for maintenance and use.
2)operation mode of equipments can be programmed by the little button inside the main board.
3) double Anti-Pinch function from both machine structure and induction. Stops automatically if there is any block during its reposition, or electronic engine stops working in the default time. Will have its second return/reset (till it comes back to where it should be), and the force is very weak(less or equal to 2kg)
4) sound and light alarming function: including break-in and tag alone alarming.
5)Anti-rushing function: without having received the signal of opening barrier (stick), the sticks lock automatically.
6)synchronizing function of single pole
7) automatic returning/resetting function: when the sticks open up, if people do not pass by within the time allowed, system will cancel the right of pass for this time. As for the standards, sticks reposition five seconds after its opening.
8) when the power is off, the access opens automatically, and closes automatically when the power is on.
9) can be linked to many kinds of card reading equipments, and work with receiving electricity relay signal.
10)One-way and two-way in and out control
Under Testing:
Real project in Thailand: