Product Details

Specifications

hexagonal wire mesh 10mm/stainless steel hexagonal wire mesh:
Economical,Just put stones in gabions then seal

roduct Description

hexagonal wire mesh 10mm/stainless steel hexagonal wire mesh

DIN1200, EN 10233-Z:1997, BS1485:1993)

Hex. wire netting, hot-dipped after weaving
Hex. wire netting, galvanized before weaving
Hex. wire netting, galvanized after weaving
Hex. wire netting, pvc-coated
Hex. wire netting of stainless steel
Hex. wire netting in normal twist
Hex. wire netting in reverse twist

Galvanized hexagonal wire netting
mesh Size			Min. Gal.v. G/SQ.M	Width	Wire Gauge (Diameter) BWG
Inch	mm	Tolerance(mm)	Min. Gal.v. G/SQ.M	Width	Wire Gauge (Diameter) BWG
3/8"	10mm	±1.0	0.7mm - 145	2' - 1M	27, 26, 25, 24, 23
1/2"	13mm	±1.5	0.7mm - 95	2' - 2M	25, 24, 23, 22, 21
5/8"	16mm	±2.0	0.7mm - 70	2' - 2M	27, 26, 25, 24, 23, 22
3/4"	20mm	±3.0	0.7mm - 55	2' - 2M	25, 24, 23, 22, 21, 20, 19
1"	25mm	±3.0	0.9mm - 55	1' - 2M	25, 24, 23, 22, 21, 20, 19, 18
1-1/4"	31mm	±4.0	0.9mm - 40	1' - 2M	23, 22, 21, 20, 19, 18
1-1/2"	40mm	±5.0	1.0mm - 45	1' - 2M	23, 22, 21, 20, 19, 18
2"	50mm	±6.0	1.2mm - 40	1' - 2M	23, 22, 21, 20, 19, 18
2-1/2"	65mm	±7.0	1.0mm - 30	1' - 2M	21, 20, 19, 18
3"	75mm	±8.0	1.4mm - 30	2' - 2M	20, 19, 18, 17
4"	100mm	±8.0	1.6mm - 30	2' - 2M	19, 18, 17, 16

Note:

1.) The above tolerance comply with standard EN10223-2:1997;

2.) Minimum Galvanization is only for typical wire diameter as stipulated separately in the column for your reference; Also it is only for hot dipped Galvanized Netting.

Note: The thickness of PVC Coating is usually 0.2-0.4mm, others may arranged as per buyers' request;

Package: Normally each roll packed in water proof paper, then in termo foil (Shrinked Plastic);

PVC Coated Hexagonal Wire Netting
Mesh		Wire Gauge(MM)	Width
Inch	MM		2'-2M
1/2"	13mm	0.6mm-1.0mm	2'-2M
3/4"	19mm	0.6mm-1.0mm	1'-2M
1"	25mm	0.7mm-1.3mm	1'-2M
1-1/4"	30mm	0.85mm-1.3mm	1'-2M
1-1/2"	40mm	0.85mm-1.4mm	1'-2M
2"	50mm	1.0mm-1.4mm	1'-2M
Anping xinlong wire mesh manufacture Co.,Ltd also offer other specifictions you need
Note: 1: The above tolerance comply with standard EN10223-2:1997. 2:Packing: Normally each roll packed in water proof paper,then in termo foil (Shrinked Plastic)