alibaba express Plane Flame treatment machine LC-F2P
USD $1,800 - $3,000 /Set
Min.Order:1 Set
Luen Cheong Printing Equipment Ltd.
alibaba express Plane Flame treatment machine LC-F2P
The 2 spark flame treatment machine is use for pre-treatment PP and PE bottle surface before printing.
Specifications:
Flame area | 25~250mm |
Height of work piece | 25-250 mm |
Conveyer size | 230mm |
Output | 1800~3000Pcs/Hr |
Conveyer transfer speed | 0-10m/min |
Compress air | 6 bar |
Fuels for flame processor | liquefied petroleum gas |
Power supply | AC 380V/ 50Hz, 3-Phase |
Machine dimension | 2200×1200×700 mm (L*W*H) |
Machine weight | 155 KG |
1 The guarantee time is 1 years, and maintain is lifelong. During this time, if any work piece dose not work well and which is not caused by worker and can not control naturally, the supplier provide it free of charge, but the carrier cost must be in buyer's side. And the machines have matched an urgent foot switch.
2 The supplier must sure the machine all work well before package.
3 we will provide the working video after delivery the machines.
4 Welcome your engineers to come to our factory for training.
advantages
1. Mainly used for the surface pretreatment of PE and PP plastic products.
2. Micro motor imported from Japan, stepless speed timing mode is adequate for different workpiece requirement.
3. The machine is two sides equipped with baffle-boards to improve the heat efficiency.
4. Advanced gushing nozzle is design generates a good combustion result, it is a product that saves energy.
5. According to the size of your product that is to be printed, replace the taper support to meet the different requirement of workpiece