Specifications

cantilever shelf ;
1.ISO9001 & CE certified
2.suitable to irregular
3.charateristic:beam can be adjustable

Cantilever Racking

Cantilever racks are designed for the safe and organised storage of long and heavy loads - ideal for timber or metal storage. Our cantilever rack systems are an effective and efficient alternative to conventional lighter weight storage solutions.

Cantilever racking provides an excellent solution to storing irregular or long items, such as furniture, tubing, lumber, etc.

This is achieved by eliminating obstructions in the front of the rack and providing a clear opening in the front of the rack in lengths as long as desired. Tower spacing, upright capacity, and arm capacity are critical for a safe and proper system. It is widely used in mechanical manufacture and architecture material supermarket enterprises

Advantage :

1.layers :2~10 layers

2.It is available in both single-sided and double-sided configurations. The double sided rack provides maximum strorage capacity on a single central column while the single sided rack is designed to fit flush against a wall.

3. You can put one panel

 

 

3.More than 10 years experience of producing the Cantilever racks and other pallet racks.

 

Design Character :

 

The Base 

• A horizontal base is bolted to a column
• Horizontal base use expansion anchor bolts to connect the floor
• Base made from High Tensile Steel
• If needed ,we will use Stiffener to increase the capacity.

The Arm  

• Cantilever arms are the heart of the rack system.Proper selection can make or break a successful storage plan.
• Arms can be adjusted on 3"/4" centers up and down the upright

 

 

Production process:

       The base of cantilever racking or the exclusive use of h profile steel production. h bearing steel according to the requirements of the appropriate choice of the national standard steel. Cantilever Racking do use specific sections of the base, the two back to back c steel plates welded together with the connection, the connection plate width is the width of the column. Two c type steel column welded connection after location in the open eye bolts for easy connection with the column. Bottom edge welded connection for easy expansion bolt connected with the ground.

       Cantilever Racking column by welding together two pieces of c beam. c steel beam to q235 quality for raw materials, steel rolling mill line after rolling into the c, in the automatic punch out of the cantilever connection control, hole spacing 140mm. In the column below, such as by way connected with the h beam welding a connecting plate. Connection with specific sections, such as by way of open joints in the bottom column bolt holes.

warehouse storage heavy duty cantilever racking section view

 

 

 

ISO & CE certificated show :