Introduction of Plaster Machine

1. By screw theory, the machine spray all dry ready-mixed mortars, such as Cement mortars, Lime plasters, Gy-psum plasters, Masonry mortars, Insulating plasters , Self-leveling floor screeds, etc.

2. The dry materials is supplied in sacks and filled into the large hopper.the low height of the SX30 machine plaster makes filling considerably easier.

3. The materials is then transported by the agitator out of the hopper into the mixing pipe of the gypsum spray plaster machine. the particular geometry of the agitator means the hopper can be emptied almost 100%.
4. The mixing area of gypsum spray plaster machine is extremely large.this means the material is perfectly mixed and reaches the rotor/stator pump of the machine in an ideal condition .there it is then pumped at pressure through the mortar hose.the nozzle is connected in the end of mortar hose with compressed air.and then the mixed mortar is sprayed out evenly.

Application of SX30 Gypsum spray plaster machine

SX30 gypsum spray plaster machine is used to spray dry ready mixed mortar, such as cement mortars, lime plasters, gypsum plasters, masonry mortars, insulating plasters, self-leveling floor screeds, etc.

 Working Principle of SX30 Dry Ready-mix Plaster Machine:

1.The dry materials is supplied in sacks and filled into the large hopper.the low height of the SX30 Dry Ready-mix Plaster Machine makes filling considerably easier.
2.The materials is then transported by the agitator out of the hopper into the mixing pipe of the machine.the particular geometry of the agitator means the hopper can be emptied almost 100%.
3.In the mixing area,the amount of water appropriate to the materials is supplied .depending on the mortar used.the amount of water can be separately regulated.the integrated water pump ensures the water pressure is always adequate.
4.The mixing area is extremely large.this means the material is perfectly mixed and reaches the rotor/stator pump of the machine in an ideal condition .there it is then pumped at pressure through the mortar hose.the nozzle is connected in the end of mortar hose with compressed air.and then the mixed mortar is sprayed out evenly.
5.The integrated mini compressor ensure the air pressure and consumption always adequate, as well as remote-control by air valve.attention for detail instruction .Please follow the operation manual.

Features Of SX30 Dry Ready-mix Plaster Machine:

1.SX30 Dry Ready-mix Plaster Machine with mixer, self-suck water pump, mini compressor and rotor/stator pump.
2.With the continuously mixing and pumping machine.
3.With Small and handy dimension and low weight, quickly and easily transport even in the most confined spaces.
4.The rotor/stator pump ensures that the material can be pumped and sprayed out continuously and evenly.
5.The SX30 Dry Ready-mix Plaster Machin always works with efficiency and silence.
6.With air valve remote-control function.
7.The machine consists of portable units, permitting easy to operate, take maintenance and use in any circumstance.

SERVICES of SINCOLA- gypsum spray plaster machine SX30

Pre-sale services

• Select equipment model;
• Design and manufacture products according to clients' special requirement;
• Train technical personnel for clients

 

The wooden cases with international standard: free fumigation safe Wood case package or other ways according to the custom requirement.
Delivery time: 10-15 days after the confirmation of the order.

 Any questions

Please contact me

My Skype: sincolasale