2016 high quality power supply 75W LED driver Non-waterproof lamp with CE&Rohs
USD $1 - $10 /Piece
Min.Order:1 Piece
Shenzhen Thinker Lighting Electronic Co., Ltd.
2016 high quality power supply 100W LED driver Non-waterproof lamp with CE&Rohs
2016 high quality power supply 120W LED driver Non-waterproof lamp with CE&Rohs
2016 high quality power supply 150W LED driver Non-waterproof lamp with CE&Rohs
2016 high quality power supply 200W LED driver Non-waterproof lamp with CE&Rohs
2016 high quality power supply 250W LED driver Non-waterproof lamp with CE&Rohs
Best selling 15W LED power supply Non-waterproof with CE&Rohs
2016 high quality power supply 75W LED driver Non-waterproof lamp with CE&Rohs
Products Description:
Model
Specification |
| HS-75-12 | HS-75-24 |
DC Output voltage |
| 12V | 24V |
Output voltage range(Note:2) |
| ±1% | ±1% |
Rated output current |
| 6.3A | 3.2A |
Output current range |
| 0~6.3A | 0~3.2A |
Wave and noise(Note:3) |
| 50mVp-p | 50mVp-p |
Inlet stability(Note:4) |
| ±0.5% | ±0.5% |
Load stability(Note:5) |
| ±0.2% | ±0.5% |
DC output power |
| 75W | 75W |
Efficiency |
| 74% | 76% |
Adjustable range for DC voltage |
| ±10% | ±10% |
AC input voltage range | 90~132VAC/180~264VAC selected by switch 47~63Hz; 240~370VDC | ||
Input current | 0.5A/115V 0.25A/230V | ||
AC Inrush current | Cold-start current 15A/115V 30A/230V | ||
Leakage current | <0.55mA/240VAC | ||
Overload protection | 105%-150% fold back current limiting, auto recovery | ||
Temperature coefficient | ± 0.02%/℃(0~50℃) | ||
Setup, rise, hold up time | 200ms, 100ms, 30ms | ||
Vibration | 10~500Hz, 2G 10min,/1 cycle. Period for 60min, Each axes | ||
Withstand voltage | I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | ||
Isolation resistance | I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC | ||
Working temperature and humidity | -10℃~+60℃(Refer to output derating curve), 20%~90%RH | ||
Store temperature and humidity | -20℃~+85℃, 10%~95%RH | ||
Overall dimension | 99×97×35mm (L*W*H) | ||
Weight | 0.20 Kg | ||
Note: 1. The parameter under the testing condition: 230VAC input, rated load, 25℃70% RH. Temperature. 2. Tolerance: Including setting tolerance, circuit stability and load stability. (Note: 5). 3. Wave test: Adopting “A12” double wire for 20MHz and 0.1 UF&47UF capacitor short-circuit for interrupting. 4. Inlet voltage stability test: the lowest voltage will be up to the highest voltage when the circuit overload. 5. Load stability test: The load is from 0% to 100%. |
Products picture:
We choose DHL,Fedex,UPS or TNT according to customers requirements;
By air or by sea is ok.
Factory view:
Thinker lighting electronic co,limited
Tel:+86-755-29071562
Fax:+86-755-27627507
TradeManager:cn1512490357