Specifications

1.excellent service
2. prime quality
3. quick delivery
3.ISO 9001:2008
4. BV ,SGS ,

 

ALUMINUM COIL

 

 

Substrates:	Aluminium (1100, 3003, 3004, 3105, 5006, 5052, 8011, etc), etc.
Thickness:	0.08-1.5mm
Width:	<1800mm
Coils core diameter:	150mm ,405mm, 505mm, 508mm, 510mm
Coating thickness:	PVDF >=25micron POLYESTER>=18micron
Color standard:	E < 2 or it is not obvious by eyeballing
Pencil hardness:	> 2HB
Coating adhesive:	not lower than first grade Impact: no any crack (50kg/cm, ASTMD-2794:1993)
Bend stength:	>100 times
Boiling point:	no any distortion and color change (in the 99 more or less 1 degree  water, then cooling 2 hours)
Corrosive:	surface deep in the 5% muriatic acid and 5% NaCL, interior deepin the 2% muriatic  acid and 2% NaCL, after 48 hours, no change

 

 

 

 

 

 

PRODUCTS

 

 

 

 

 

1, Material:Pre-treatment material from HenKel &Chemtell from Germany,

2, Paint: 70% PVDF from PPG or Valspar;

3.Pretreatment: the raw aluminum has to be washed by acid, and chromized. After it is dried out, it will be covered by oxide film to heighten the adhesion.

4, Colors: Can do as your requirement We are the first one to pass CTC of national testing certification center of building materials.

5. Good quality for Benting:

6. Polyester coating ingle coating, one layer, 18μm; double coating, two layers, 25~27μm. PVDF coating: two layers of PVDF coating, at least 25μm, and if required, it will be covered by another layer of varnish, 35μm in total.

 

Color Match:

1. For custom' color requests, we can deal as following:

A. Supply a physical sample of custom color. A color sample on metal is preferred. If other, it is also acceptable. But the color matching rate may be not good as color on metal.

B. New color sample is usually offered by our paint supplier in 5-7 days, special color should be in 7-10 days.

C. Upon receipt of color sample, please approve in writing as soon as possible. Once you approved, we will arrange purchasing and production.

Note: Color difference maybe occurred in different production batch, so it is suggested all panels are placed in one order for same project. And keep same direction as arrow on protective film when installing to avoid any color difference by vision.

2.For general colors, please refer to our color chart

 

PACKING

 

 

 

 

 

 

 

 

 

Packing

 

Plastic film wrapped inside and carton packing. Wooden pallet with steel strip tied. Buyers can slao choose to pay for wooden case packing, which enables safer and more room saving in loading.

 

 

 

 

 

Application:

 

Building: Coated aluminium coils are undoubtly applied to most industries, specially construction industry. Weather resistant, highly decorative with insulating property, Colour coated coil is an ideal materials for Venetian blinds, rolling shutters, ceiling panels, roofing, façade, ACP Panel. Eveas etc.

 

Typical products

 

1.Roller Shutter:

 

Durability and weather resistantAluminium Composite Panel (ACP), Ceiling, Roofing etc: High decorative and weatherabilityEaves: Corrosion resistant

 

2 Industry:

 

Colour Coated aluminium coils is an ideal material for white appliances such as refrigerator due to it's property of electrical and thermal conductivity, and corrosion resistance.

 

3 Transport:

 

Light weight, strong and weatherability have been made coated aluminum very popular in truck body, caravan, buses, insulated and refrigerated vehicle.

 

4 Signs:

 

Application in Signs requires high colour consistency and flat surface. UAL can fulfill the requirements with excellent performance.

 

 

ABOUT US

 

 

 

 

 

 

OUR MARKET