NT-40 polyester glass fibre body filler is a two component chemical paste reinforced with a glass fibre used for the bridging of holes and rust in surfaces such as steel and GRP.
Strong polyester bridging compound. Ideal for bridging holes and is water resistant when cured.
ADVANTAGES of NT-40 body filler
1. Very hard durable surface
2. Can be sanded and shaped if required.
3. Easily covered with standard polyester filler or can be repainted directly
Product Technical Data Sheet
Prepatation:
Clean surface with warm, soapy water to remove all wax, grease and oil. Allow to dry.
Mixing Ratio:
NT-40 polyester glass fibre filler: 100% by weight
BPO Hardener : 2-3% by weight
Stir the body filler before using, knead the cream hardener. Mix thoroughly at room temperature , using plastic spreader or putty knife to uniform color on clean, nonporous surface. Mix only small amounts that can be used within 3 to 4 minutes. Do not add cream hardener in filler container.
Methold of application:
Apply in thin layers and spread smoothly, do not blob on or apply all at once
Pot Life:
3-4 minutes
Drying/Sanding Times:
Allow the application of filler to cure 20 to 30 minutes. Sand with 80 grit sand paper and featheredge with 180 grit sandpaper or finer. Wait 1 hour before painting. Drying time depends on temperature and amount of hardener used.
Optional: Apply a very thin layer of NT288 Kombi Filler to fill pinholes or small imperfections if necessary.
Recoated:
Can be primed and painted after 1hour.
NOTES:
Read all directions and warnings prior to using Nice Touch products.
Never return mixed filler to can
USE WITH CREAM HARDENER ONLY!
Storage:
12 months in original sealed can at cool and dry place at 20°C
Nice Touch Fibre Glass body filler
1. OEM accepted.
2. FREE samples are always available as per your needs
3. Promotional materials to clients for support their marketing, such as T-shirt, ball pen,posters, mixing ruler, mixing machine and so on
4 Technical support service by our R&D department is also available
5.Arrange all the export procedures for our customers to ensure their container safety packed and safety shipped.
6. Very good regional market protection and promotion support, for examples, if you are regional distributor, we won’t sold to others in same city or even same country.
7.Strict quality control and stable product performance,steady large production capacity.
8.Excellent customer service system.
1. Are you factory?
Yes, We are 100% car paint manufacturer in South of China, located in Guangzhou which takes about one and half hours drive from the Airport.
2. How can we visit your factory?
You can contact us to confirm the arriving time and we will send driver to pick you up at hotal.
3. How to assure product quality and quantity?
Each production process are checked by QC departments, the chemical raw material and products are stored in good warehouse, in case any rains, direction sunshine,etc.
4.Can you produce as per samples?
Yes, we can produce by the samples you provided or technical data.
5.What is your sample policy?
Free samples are always available as per your needs, however, the customers have to pay the courier charges. And the courier you paid can be deducted when you place order, or can be returned by your feedback of the samples.
6.How about your delivery time?
Generally it will take 10 to 15 working days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
Distributors Wanted!
Join US!!!
Elaine Yun
Guangzhou Adyer New Material Technology Co., Ltd
Building H, No.188 Kaiyuan Avenue, Luogang, Guangzhou, GD, China.
Mobile/Whatsapp:+86 156 2648 6300
Skype:elaine.yun2014