Product Details

Specifications

XLPE cable for underground use armored cable can be laid in well,indoor, tunnelsand mines,underground.

Conductor:
Solid or stranded Copper/Aluminum

-Insulation:
Cross-linked polyethylene( XLPE or PVC)
-Circuit Identication:
The insulation shall be red, black
-Filler:
Polypropylene lament with lapped binding tape
-Inner Sheath:
Polyvinyl chloride (Black)
-Armor:
Galvanized steel wire/steel tape/Unarmored/Aluminum wire
-Core-covering:
Binding tape
-Outer Sheath:
Polyvinyl chloride (Black)

-Application:
For use in ducts, trays and direct burial in ground. The cable is subject to immerse in water all the time.
-Standards / Testing Specications:
IEC 60502-1

Installation
This cable can be installed in duct, tray or direct burial. It is recommended that the installation instructions indicated by the Local Electric Code, or any equivalent, be followed,so that the safeguarding of persons and the integrity of the product will not be affected by eciencies in the installation.

XLPE Insulation Power Cable

The Application of Power Cable

Power Cable is used to transmit power on power distribution circuit of AC 50HZ, rated voltage 35 KV or lower. It has not only excellent electrical performance, mechanical performance, heat-resistant & anti-aging performance, environment resistant character & chemical-corrosion resistant performance, but simple structure, light weight, without restriction by laying fall, and it also has high temperature (90) for long term

Instruction

I. Executive Standard: GB12706.1.3 adopts international electrician committee IEC60502

II. Working Features:

1. Environment temperature should be no lower than 0 for laying, the cable fall without limitation

2. The min bending radius of cable is stipulated as follows: Single core: 20(d+D) 5% three cores: 15(d+D) 5% (D is actual diameter of cable; d is actual outer diameter of conductor).

3. Operation temperature of cable PVC sheath is no more than 90.

4. Max rated temperature of cable conductor is 90 , and no higher than 250 in time of short circuit (max. Lasting time is no longer than 5s).

Our company can produce both flame retardant and non-flame retardant series of XLPE power cable.. Our products can be produced according to our works specifications which are equivalent to GB12706, IEC60502, IEC60332, IEC60754, and its some indexes are superior to standards stated above..

The flame-retardant cable covers all kinds of low-smoke low-halogen, low-smoke halogen free and three classes of A, B, C. We can design and manufacture special XLPE cable according to the other standards require by the customers, such as heavy section cut part conductors, water-resistant, defend termites, defend mouse, and so on..

Type		Description	Main Application
Cu core	Al core	Description	Main Application
(ZR)YJV or (ZR)YJY	(ZR)YJLV or (ZR)YJLY23	(Flame retardant) Cu, Al core XLPE insulated, PVC or PE sheathed power cable.	For laying indoor, tunnel, underground and canal. Unable to bear external mechanical pulling force and pressure during laid.
(ZR)YJV22 or (ZR)YJY23	(ZR)YJLV22 or (ZR)YJLV23	(Flame retardant) Cu, Al core XLPE insulated, steel armoured, PVC or PE sheathed power cable.	For laying indoor, tunnel, underground and canal. Able to bear external mechanical pulling force , but unable to bear large pulling force.
(ZR)YJLV32 or (ZR)YJLV33	(ZR)YJLV32 or (ZR)YJLV33	(Flame retardant) Cu, Al core XLPE insulated, fine steel wire armoured, PVC or PE sheathed power cable	For laying in shaft, water under ground and large difference of level, able to bear mechanical pressure and moderate pulling force.
(ZR)YJLV42 or (ZR)YJLV43	(ZR)YJLV42 or (ZR)YJLV43	(Flame retardant) Cu, Al core XLPE insulated, thick steel wire armoured, PVC or PE sheathed power cable	For laying in the water, seabed and large difference of level, able to bear large mechanical pressure and pulling force..

XLPE cable for underground use

6~35kV XLPE insulation armour power cable

Cable Construction:

Conductor:Al or Copper Wire

Rated Voltage:6~35kV

Insulation:XLPE

Inner sheath:PVC

Armour:SWA(fine or thick galvanized steel wire) ,STA(galvanized steel tape
),AWA(aluminium wire)

Outer Sheath:PVC or PE

XLPE cable Application

XLPE cable of XLPE cable is mainly Can be laid in verticalsection,indoor, tunnelsand mines. cable can bear outer machanic force and very large tractional force.

XLPE cableGeneral Characteristics

XLPE cable is suitable for use in rated AC voltage (Uo / U) 6/6 ~26 / 35kV system transmitting and distributing lines. According to different sheath make ups, they can be used for layingin the air (cable bridges,indoor wall supponts and groove boxes) and in soil (direct burying, cable canals and pipelines, etc.)

XLPE cable has anumber of advantages overpaper insulated and PVC insulated cable.XLPE cable has excellent electric property, mechanical property, high ageing resisting, environmetal stress resisting anti-chemical corrossion, and it is simple construction, using convenient and higher operating of long term temperature.It can be laidwith no drop restriction.Various offlame-retardant andnon-flame retardant XLPE cable can be manufacturedwith three technology
(peroxide, silance and irradiation crosslinking). The flame-retardant cable covers all kinds of low-smoke,low-halogen, low-smoke halogen free,and non-smoke nonhalogenated and three classes ofA, B, C.
Our XLPE cable can be manufactured according to company's specification which is equivalent to IEC60502,IEC 60 332, and IEC 60 754. Some of indexes are superior to above international standard IEC.Some of special XLPE cable can be manufactured according to the other standards required by customs.
XLPE cable having higher long-term working temperature and greater current rating, at the same environment XLPE cable may be reducedsize (nominal cross-section) 1 or 2 class in comparison with paper and PVC cable. This is not only improve the quality and properties of products, but also reduce cable's production costs.