1.  Introduction of wearable grind steel rod 

   The new alloy wearable grind steel rod produced by our company is produced by using the latest method, and the size and specification can be adjusted according to the requirements of customers, so that the flexibility is greatly improved, and the unnecessary waste is eliminated. Meanwhile, it prolongs the service life, improves the production efficiency of the mill, saves the production cost and reduces the work force.

 2. Specification of wearable grind steel rod 

Our products have obtained ISO 9001---2008.

Dia: 30~140mm  Length:3000-6000mm or as required

3. Characteristics of wearable grind steel rod 

1).The wearable grind steel rod has the performances of low abrasion, high hardness (45-55HRC) and strong toughness, and the wear-resisting effect is 1.5-2 times the rolled steel bar; after tempering, the internal stress is relieved, the wearable grind steel rod is not broken, the straightness is good, the rod does not bend, and the two ends are not tapered. The wear-resisting property is excellent, so that the cost is greatly reduced for customers.

2).Because of using the latest method to produce, the size and specification can be completely adjusted according to customers' requirements, the flexibility is greatly improved, and unnecessary waste is eliminated.

3).The service life is prolonged, the cost is reduced, the work force is reduced, the trouble of stopping the mill to add the steel bars every day is solved, and production volume is greatly increased.

4. Applied fields of wearable grind steel rod 

1) Metal Mines;2) Cement plants;3) Water coal slurry;4) Power stations;5) Chemical industry

5. Production technology process of wearable grind steel rod 

Check the raw material——blank——grind the burr of blanked material——heat in the intermediate frequency heating furnace——align——quench——temper——inspect——package