Big concrete blocks for sale glass kiln fireclay bottom block of tin bath
Negotiable /Ton
Min.Order:10 Tons
Shandong Zibo Shenzi Refractory Materials Co., Ltd.
glass fusing kilns tin bath bottom clay block concrete blocks
super little cement tin bath bottom block glass furnace block fired perforated brick
Refractory bricks glass furnace tin bath brick vibration molding brick perforated block manufacturer
bottom brick of tin bath refractory bricks glass fusing kilns perforated brick
Tin bath bottom brick cheap bricks glass fusing kilns perforated clay brick
Tin bath bottom brick was developed by our comapny in 1986. It has been widely used as tin bath bottom of float glass furnace over 200 float glass production lines around the world with longest life up to 15 years. This product has features of good resistance against alkali corrosion, anti-flaking, good thermal shock stability, high processing precision and convenience for installation etc.
Super Little Cement Vibration-molding Bottom Brick of Tin Bath | |
Al2O3 (%) | 52-55 |
Fe2O3(%) | ≤ 1.2 |
R2O(%) | ≤ 1.0 |
Refractoriness (℃) | ≥1750 |
Refractoriness Under Load (KD℃) | ≥1400 |
Reheating Linear Change (1400℃ 2h) | +0.0/-0.2 |
Apparent Porosity (%) | ≤18 |
Bulk Density (g/cm3) | ≥2.3 |
Atmospheric Pressure Strength (MPa) | >60 |
H Diffusion Index (mmH2O) | ≤100 |
Thermal Stability (1000℃,Water Cooling) | ≥10 |
ShanDong ZiBo ShenZi Refractory Materials Co. Ltd was founded in 1998, with two factory sections which cover an area of 120000 square meters. Our company mainly produces bottom bricks of tin bath, big clay bricks, low porosity bricks, high alumina bricks, various light weight bricks, sillimanite bricks, mullite bricks, ramming material, casting material and so on. The products have been exported to many countries, such as Indonesia, Iran, Saudi Arabia, Russia, Japan, Korea, Vietnam, Ukraine, etc.
1. We will reply to you immediately.
2. Our products will be made according to your index.
3. Other details could be discussed according to customers’ requirements.
1. What’s the payment?
Usually T/T, others could be discussed.
2. When will you deliver the goods?
The delivery time will be determined according to the quantity of the order.
3. Do you provide samples?
Yes, samples are available.
4. How are your products’ quality?
The products will be strictly inspected before shipment, so the quality could be guaranteed.
5. Do you accept OEM?
Yes, we can do OEM.
Other products
Thanks for reading our websites!
If you are interested in our products, you could contact us at anytime!
Welcome to visit our factory and inspect the goods!
Contact Person
Mandy qu
TEL: +86 18764307211
SKYPE: quglacier